Yet another S2 conversion in USA

[93URS4Avant]

Boo!!! 3" all the way baby!

[s4kido]

Ok.. Little update...
I was in the garage on saturday and took most of the engine part like intake manifold, water lines, EGR stuff..
i also test fitted the intake manifold:

[s4kido]

Sorry for the Crappy picts but my camera is broke.. I need to buy another one.. here are pictures of me taking the coupe apart:



Washing up the engine bay:


This is after the wash:

[Fat Audi 80]

Cool! Keep the updates coming.

[Ruffiano]

Are you painting the car? Why did you take off the fenders(wings)?

[s4kido]

i took them off bc i didn't want to scratch them and also i'm debating on painting the engine bay black..

[s4kido]

What do you guy recoman regaring suspension..
I have new shock inserts but i want to lower the car a little.. Anyone with any suggestions????

[Jamo]

I believe S2 springs are lower than CQ springs so that's an option to change to S2 springs, I think Eibach is a popular choice state side for lowering springs

[s4kido]

i saw H&R but they are like 220usd.. I wanna see something less money.. i tried looking for Eibach but i cant find anything..

[Rusty]

You want 2 pairs of front HnR springs, the rears sit too low, even with no weight in mine it sits just level. I think this has a little to do with the pro mounts on the front too.

Notmal CQ springs won't work well as they're a lighter car, a set of V6 springs might work OK. $220 is cheap! HnRs for the coupe over here are £250+!

If you're feeling flush then get some CCKs off Mance or 2Bennet and get some springs that suit, 350lb for road/track day, 500+ for track only.

[s4kido]

So i should buy 2 front sets for the car so it will sit even???..
I will get some more pictures up today. i was at the garage for a little while today and we got some stuff done..

[fish]

Put the exhaust cam from your standard engine in the AAN.

[Tonks4x4]

my 2 cents worth is to keep the suspension at stock height. Using new s2 springs and bilstein inserts. Gives a firm ride but not banging your car to bits everytime you hit a pothole in the road.

[s4kido]

i would like to drop it a bit.. it will handle a lots better...
as for the cam i dont know if i wanna do that... i wanna part out as much as possible...

[s4kido]

sorry everyone... i havem't work much on the project.. i did on saturday pull out the old harness and the batter tray......
i also started painting the engine bay..
I have a question regarding the battery cables... should i run them inside the car or underneath???
i i gonna pull the cables from the urs4 and use those or i will just buy a relocation kit...