RS2 "stroker" projekt... 700hp

[Tom_]

The work is not done... dont have an answer yet

how many u payed to this time,and which parts do u missed?

[smiler]

how many u payed to this time,and which parts do u missed?

I only have the calipers and the pads... €1100
Need discs, brackets and hoses... maby €600


It al depends on where you buy the stuff and what people you know who can help you...



Cant use the 330 discs i bought... will probably use the 322 instead, if its possible.

[Tom_]

why u dont use a 18" rims?I think that than u should fit the calipers with no problem. Or u are decided to use a 17" rims?

[GazzaG60]

looks good.

same calipers here. i run then on the 993 tt discs. they clear 17" by a fraction. 18 is good. looks a good project.

[smiler]

why u dont use a 18" rims?I think that than u should fit the calipers with no problem. Or u are decided to use a 17" rims?

The Cup's Im using are 18x8,5".

looks good.

same calipers here. i run then on the 993 tt discs. they clear 17" by a fraction. 18 is good. looks a good project.

Thanks!

993tt 322mm?


Im looking for new rims now also
The cup reps are realy heavy.

[smiler]

Some engine pics...


Head, bigger valves Inconell...




Diesel block 2,5l...




JE-pistons 81,5...

[Jamo]

No piston notching of the block for the extra rod angle like in the below pic?

[smiler]

It's notched... but not more than necessary

[Tom_]

looks good.

same calipers here. i run then on the 993 tt discs. they clear 17" by a fraction. 18 is good. looks a good project.

so if i understand good, i cant use a 17" wheels on 325mm , i must use a 18" ?thx,sry for stupid question

[GazzaG60]

i use the 2 piece 993tt. think they are 332x34. not 100% on that. got them from eurocarparts £117 each at the time.

they fit behind the 17" bbs RS2 wheel fine. the caliper is the biggest issue. its so large its a rizla paper away from the wheel inside. a stone in there scratches the inside of the rim. its well clear of the spokes. i upgrade to bbs RC in 18" to make this clearance more.

i have custom brackets and bells/hats for the discs. bambridge may be able to help here.

i painted the yellow calipers silver.

i run red stuff pads. had the brakes on 18 months or so.

[smiler]

i use the 2 piece 993tt. think they are 332x34. not 100% on that. got them from eurocarparts £117 each at the time.

they fit behind the 17" bbs RS2 wheel fine. the caliper is the biggest issue. its so large its a rizla paper away from the wheel inside. a stone in there scratches the inside of the rim. its well clear of the spokes. i upgrade to bbs RC in 18" to make this clearance more.

i have custom brackets and bells/hats for the discs. bambridge may be able to help here.

i painted the yellow calipers silver.

i run red stuff pads. had the brakes on 18 months or so.

Is it this disc? 993T 322x32 99335104510



Every bigger disc i have found brings the caliper to close to the spokes.



Any pics of your upgrade?

[smiler]

I'm now looking for the definitive rims so i can mount the front brakes... my cup can't take the GT2 with bigger discs. And they are heaaaaavy!


Some suggestions...


Victor Equipment LeMans 8x18" ET45 €1000



OZ Allegerrita 8,5x18" ET53 7,9kg €1600
Are available in many colors.



BBS LeMans 8,5x18" ET52 €3000

[lind4hl]

*hrm*

http://www.imagewheels.co.uk/wheels/small%20cast/355.jpg

http://www.imagewheels.co.uk/wheels/small%20cast/bps_gold_18inch.jpg

336£ each

[Jamo]

Thanks!

They are 99635140902 purchased from Utzon.se

l hope they will work, nothing tested and the brackets for the calipers are not made yet.

That's interesting Smiler, are the hat height of the 99635140902 discs the same a the OEM RS2 discs? as these discs are dirt cheap and cheaper than the 322x32mm 965 turbo ones

[Jamo]

Is it this disc? 993T 322x32 99335104510



Every bigger disc i have found brings the caliper to close to the spokes.



Any pics of your upgrade?

For an RS2 they are the wrong hat height you want 965.351.045/046 discs

Just seen you've given up on the 330mm discs