RS2 "stroker" projekt... 700hp

[PaulJ]

My sizes tie up with Jamo's comments

965 2 piece hat 45mm
993 one piece hat 40mm

965 2 piece are what audi supply as oem disks

That would be the one's I would go with as 5mm more space
and if required could easily be split and larger hat made

All very interesting

[Jamo]

Ah Bingo Paul, I had forgotten about OEM RS2 discs the one in the picture must be the OEM RS2 322 disc with the correct hat height.

[PaulJ]

You know when your been shafted when you buy audi disks which are actually
porsche and audi charge you more than porsche would have by some 30%

Would not like to pay 125 per hour for fitting them neither, Especially rear handbrake cables which are a PITA

Cheers PaulJ

[smiler]

My sizes tie up with Jamo's comments

965 2 piece hat 45mm
993 one piece hat 40mm

965 2 piece are what audi supply as oem disks

That would be the one's I would go with as 5mm more space
and if required could easily be split and larger hat made

All very interesting

Your killing me guys


The 2 piece is from a 993 TURBO... 993 351 045 10.
965 351 045 00 is what Utzon sell as the RS2 BigRed disc, one piece.


Lets leave this discussion... just getting more and more confused

[Jamo]

Your killing me guys


The 2 piece is from a 993 TURBO... 993 351 045 10.
965 351 045 00 is what Utzon sell as the RS2 BigRed disc, one piece.


Lets leave this discussion... just getting more and more confused

No confusion the 993 351 045 10 is 40 mm hat, it is not 45mm

So in summary

993 disc = 40mm hat

965 and OEM RS2 322 disc = 45mm hat

There is no 2 piece porsche disc with 45mm hat off the self

[smiler]

Got my 996 callipers yesterday and som brackets from Bruno.
Also baught a (3 ) spanner for the flared nut and bleed nipple

[smiler]

Some brackets made for the 6-pot's
The disc is the 322mm 965 351 045 00

As you see its a tight fitt even with the 18".
Are my cup reps extremly small inside or what?





On the new rear callipers the flared nut and bleed nipple came off very easy for the switch.

[Bram]

Looking good. I expected that you would be able to put those 6 pot porkers with at least 345mm discs in a 18" rim

[Jamo]

Looking good. I expected that you would be able to put those 6 pot porkers with at least 345mm discs in a 18" rim

The calipers are large, a lot larger than the 4 pot GT3 ones, remember they are designed to fit under 19"

[smiler]

The calipers are large, a lot larger than the 4 pot GT3 ones, remember they are designed to fit under 19"

Yey! :mischeif:

Just proves that many dont know what they are talking about.

I think we can say they will be hard to fitt under 17".

[Jamo]

Bit harsh I would say, if you hadn't seen the 6 pots in real life it's hard to envisage how big they are.What bolts are you using for 6 pot to bracket?

[smiler]

Bit harsh I would say, if you hadn't seen the 6 pots in real life it's hard to envisage how big they are.What bolts are you using for 6 pot to bracket?

The pic is from my bracketmaker. Think the bolts in the pic are the ones for the rear 996 uppgrade. He is cutting them for me.
Why?

Just that many think they know so much but newer tried it them self.

No hard feelings


Just recived the wrong guide sleeves for the handbrakecable
Would have been nice to mount the rear brakes

[terrybullwon]

Nice brakes, Jamo just work out the length and pitch with the shank length also and get the bolts from a fastners they will cost like £3.00 each rather than the £9.00 each audi or porsche will want

[Jamo]

Nice brakes, Jamo just work out the length and pitch with the shank length also and get the bolts from a fastners they will cost like £3.00 each rather than the £9.00 each audi or porsche will want

Porsche ones are £2 each

I already know where to get my bolts but if they dont get them in stock i'll buy the porsche one and cut down.

[smiler]

The price on the bolts shouldent be the problem in this project



Here is a link to a crazy projekt from de guy who made the frontbracket...

Bentley EXP Speed 8 Replica

http://rejsa.nu/forum/viewtopic.php?t=44152