80Q Competition 20VT inside¡¡

[quattrostyle]

glad you've put the powerfull lot in the comp

but please run the exhaust to the back of the car

[s2_bo]

Wow. How much did you pay for that lot?

The disks don't look to health though.

[Rocco]

glad you've put the powerfull lot in the comp

but please run the exhaust to the back of the car

we will see ,because the metal pipes was made and welded for use in one side

i want to start it SOON¡¡

[Rocco]

Wow. How much did you pay for that lot?

The disks don't look to health though.

i was thinking the same ,but it seems to be a "normal" PCCB discs corrosion,not like our steel discs...this is another world

i have paid 1800€ for ALL ,fronts & rear discs + Audi Ceramic calipers with of course it´s 90% full ceramic pads

not bad i think

[Simons]

Hi friend! good progress!! When I will go to navarra I hope to see the proyect finalized...and I hope to test it

I know those books

I think that the rims looks well, but I need to see it on the road

Carboceramics brakes are very bad...give me!!

Go ahead

[20comer]

Would it be easier to put a 20vt engine in a 7A quattro 80?
Sorry for the OT but I think it is somewhat related.

cheers

[Rocco]

Would it be easier to put a 20vt engine in a 7A quattro 80?
Sorry for the OT but I think it is somewhat related.

cheers

i think that not it is the same "easy" or "hard" to install in both. but coupes are diferent than the B4 chasis

[20comer]

This is the car I had in mind.
http://marcodecanaveses.olx.pt/audi-...135606144#pics

I guess all the gearbox, prop and driveshafts, hubs and diffs would have to be replaced with S2 avant as well?

Thanks

[Zoig]

This is the car I had in mind.
http://marcodecanaveses.olx.pt/audi-...135606144#pics

I guess all the gearbox, prop and driveshafts, hubs and diffs would have to be replaced with S2 avant as well?

Thanks

It's B3, S2 coupe running gear could fit, but S2 Avant/Limo will not. Rear axle is different with double wishbone suspension.

[Rocco]

after some problems with custom wiring loom....it is finally started for first time¡¡¡

only iddling but it is something at least

i was having problems with PIn 27 or 37 signal... not found.,and i had to check Paul Nugent PDFs about ABY Pins.

now i have to solve the issue,because i had to do a "custom" momentaneus wiring for try..and GOOD LUCK¡¡

we will see how it sounds with 3" exhaust sistem and complete free wastegate exhaust



TODAY IS A HAPPY DAY FOR ME¡¡

[prj]

Congrats!

[quattrostyle]

well done Rocco

[Dan]

Good work mate!

[Skull]

poor compi

[quattrostyle]

he's doing it justice, unlike the vacuum cleaner 4-pot engine.