s2 xxxhp 90% ready

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • Petya
    replied
    Originally posted by audiman
    I have a very similar setup, 20Volt, on my car and 2.1 bar boost @3.8krpm
    It is ok...We can make same boost in low rpm with some map modification, but how many boost do you have between 5600-7200? I think max 1.4-1.5 bar...

    Of course possible make many program for one motor, but must be know first, what is the intention. Big torque for city use, or high hp for racing...

    Leave a comment:


  • audiman
    replied
    I have a very similar setup, 20Volt, on my car and 2.1 bar boost @3.8krpm

    Leave a comment:


  • PekkaS
    replied
    Originally posted by 20Volt
    It' has a KKK K26/27 built from a 10VT K26, 600cc injectors, 1.7-1.9 bar boost... etc.
    Quite large injectors there... I´ve been told that it´d be best to go with smallest possible injectors to get good spray. RS2 injectors (440cc/3,8bar) are good for about 450hp.

    So I´d say those injectors are out of tune with rest of the package.

    Leave a comment:


  • 20Volt
    replied
    Originally posted by audiman
    LOL, of course, sorry. Not sure what the problem could be then. RS2 setups normally produce good boost at about 3000rpm upwards. If it is only doing it at 5k+ then something is wrong with the setup.
    It' has a KKK K26/27 built from a 10VT K26, 600cc injectors, 1.7-1.9 bar boost... etc.

    Leave a comment:


  • audiman
    replied
    LOL, of course, sorry. Not sure what the problem could be then. RS2 setups normally produce good boost at about 3000rpm upwards. If it is only doing it at 5k+ then something is wrong with the setup.

    Leave a comment:


  • 20Volt
    replied
    Originally posted by audiman
    What fuel do you have out there?? Im running 98 octane
    98! What else?

    Leave a comment:


  • audiman
    replied
    What fuel do you have out there?? Im running 98 octane

    Leave a comment:


  • audiman
    replied
    Where do you start?? It could be anything from boost leaks, timing out, to poor mapping

    Leave a comment:


  • 20Volt
    replied
    Originally posted by audiman
    I have a high spec'd K26/27 #8 hotside and this is doing 2.1 bar at 3800rpm what they hell is wrong with your car???
    Perhaps we don't know the recepie here in Hungary. Got a modded RS2 (12,6@~175km/h) and the show starts at 5500 rpm.

    What could be wrong?

    Leave a comment:


  • audiman
    replied
    I have a high spec'd K26/27 #8 hotside and this is doing 2.1 bar at 3800rpm what they hell is wrong with your car???

    Leave a comment:


  • aronmatic2
    replied
    i need that kind of turbo what makes good torque at low rpm and can go around 400-450hp. i think its not imopossible.
    i have k26/27. its start around 4500.

    Leave a comment:


  • 20Volt
    replied
    Originally posted by aronmatic2
    Mihnea

    i know you have good injectors but i tryed to contact you 10 times at the last 3 weeks and i cant catch you. thats why i bought those ones. what you need to make a good program to my car? i am thinking about a better turbo. what you think?
    GT35R rulez!

    Leave a comment:


  • aronmatic2
    replied
    Mihnea

    i know you have good injectors but i tryed to contact you 10 times at the last 3 weeks and i cant catch you. thats why i bought those ones. what you need to make a good program to my car? i am thinking about a better turbo. what you think?

    Leave a comment:


  • caterpillar
    replied
    try this .they have injektors....www.mrm-racing.a.se

    Leave a comment:


  • audiman
    replied
    They seem to be working OK

    Leave a comment:

Working...