Tweet
I also got this now 
-
1360kg/600Whp Avant
0-200km/h 9sec -
What tyres where you running in Bitburg?Comment
-
i use bridgestone re070. The compound is to hard to get good grip on cold tires. I like to get some semi slicks as toyo R888 but thy are expensive
1360kg/600Whp Avant 0-200km/h 9secComment
-
I see, it would definately help though or was the track slippery as well?Comment
-
Track was fine. Some good tires and faster schifting and i will run a 10.99 i hope.1360kg/600Whp Avant 0-200km/h 9secComment
-
That beast shifts! Great car well done 
What does it weigh now?
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 AvantComment
-
I think it is around 1350/1400kg now. And i cant wait to try the dog box.
1360kg/600Whp Avant 0-200km/h 9secComment
-
a very nice motor you built.
i have a UrS4 limo and build these winter almost the same setup with a precision 6262,VEMS on E85. i hope to get 6XX HP too...
how much CC have your injectors?Audi UrS4 20VT Precision 6262, VEMS, CatCams, SOLD
VW T4 TDI Multivan
pleasure by pressure...
If you are not breaking parts, you're not going fast enough...Comment
-
I'm running 1200cc EV14 injectors @ 3.0bar. But now with 700hp I'm running on 3.6bar as the duty-cycle was high.Originally posted by Ficksy Heart View Posta very nice motor you built.
i have a UrS4 limo and build these winter almost the same setup with a precision 6262,VEMS on E85. i hope to get 6XX HP too...
how much CC have your injectors?1360kg/600Whp Avant 0-200km/h 9secComment
-
What is the turbo specs on this one?
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - ProjectComment
-
Ball Bearing PTE6262... On Cat CamsOriginally posted by Thuppu View PostWhat is the turbo specs on this one?
Sent from my HTC One using Tapatalk_Rubí_
Comment
-
Yes i have a Precision 6262 ball bearing. It has a billet compressor and is oil cooled only. Hotside is T4 .68a/r
I'm really happy with it and used it now for 6500km
I don't use cat-cams. I have 7a intake and exhaust cams @ top secret timing even i don't know
1360kg/600Whp Avant 0-200km/h 9secComment
-
Even more impressive on 7a'sOriginally posted by V6quattro View PostYes i have a Precision 6262 ball bearing. It has a billet compressor and is oil cooled only. Hotside is T4 .68a/r
I'm really happy with it and used it now for 6500km
I don't use cat-cams. I have 7a intake and exhaust cams @ top secret timing even i don't know
Sent from my HTC One using Tapatalk_Rubí_
Comment
-
or the dog engagement in all gears? this is nice for powercars but not nice for street using
audi coupe quattro b2 2.2 20vt project (573hp-626nm)
TWINCHARGED power,zero lag
AEM W/M injectionComment
-
Dog engagement is only in 1 2 3 and 4 gear. 5 and 6 are syncros. I have heard different story's about driving dogbox on the street so i don't know. If its really bad i will only use it when drag-racing and swap it back for street drivingOriginally posted by quattro-nick View Postor the dog engagement in all gears? this is nice for powercars but not nice for street using
1360kg/600Whp Avant 0-200km/h 9secComment
Comment