V6quattro +600Whp Avant project

[EspenW]

Had some fuel-pressure problems. Pressure was around 13psi to low on boost
The fuel filter was really dirty so did a run without it and the pressure is good now.

Really weird, running the filter for 4500km now. Can this has something to do with the E85?

Didn't see this one until now.
Yes, E85 cleans out you tank and systen, so replacing the fuel filter after running on E85 for a while is (as you saw) important.

[V6quattro]

Just tighten the bolts again and have another go

I will use some lock-tide to

Hi V6,

In these last few photos, is it you making your own rear suspension arm bushes ?

Thanks.

Yes. I will make some bushes from delrin my self. And i will use powerflex on the lower inner suspension arm and top inner suspension arm to allow a little flex.

Didn't see this one until now.
Yes, E85 cleans out you tank and systen, so replacing the fuel filter after running on E85 for a while is (as you saw) important.

Hy thanks for your input. I'm running a brand new fuel-cell and lines. The stuff found in the filter was gray. I think is from the carbon brushes on the fuelpump.

[V6quattro]

Rear suspension finely finished.

[macspring]

Rear suspension finely finished.

Looks lovely, pity I'm not close enough to have a ride in it !

Which company's ARB did you fit ?

Could you post what you think of the KW3, when you have had a chance to try it out, thanks.

Well wear.

[V6quattro]

Looks lovely, pity I'm not close enough to have a ride in it !

Which company's ARB did you fit ?

Could you post what you think of the KW3, when you have had a chance to try it out, thanks.

Well wear.

I fitted a White-line BAR13.

Is hard for my to tell what i think of the KW3. I don't have experience with other brands. But i'm really happy about it and it is still a smooth ride. And the quality of the INOX set is nice. Thy won't corrode.

[macspring]

I fitted a White-line BAR13.

Is hard for my to tell what i think of the KW3. I don't have experience with other brands. But i'm really happy about it and it is still a smooth ride. And the quality of the INOX set is nice. Thy won't corrode.

Thanks.

Looking forward to a video of it on the road, in due course.

[V6quattro]

Also started to take the engine out of the car for some maintenance

[macspring]

You take the engine out as I would change my rims.

Nice facilities.

[V6quattro]

Engine out

[Error404]

What "maintenance" are you doing with the engine bay stripped?

[quattro-nick]

very nice car and great pictures!
wich gearbox do you drive?

[V6quattro]

What "maintenance" are you doing with the engine bay stripped?

That is my special 100% out of control maintenance

very nice car and great pictures!
wich gearbox do you drive?

I have a DSY box from a B5 S4.
I only upgraded the 1-2 shift collar as i had hard shift problems.

[V6quattro]

Also started at the interior.

[V6quattro]

Did some more work on the interior.

[V6quattro]

Some loom stripping