Biturbo's Audi S2

[Biturbo]

Soon my car will be tuned by my friend who is profesional tiuning cars with vems

[chezz]

Running two pumps means you have two options - running in parallel will give you increased volume rate/flow...running in series will give you increased pressure...

[FCP-ENGINEERING]

Mister Kamutas will help you to push to the right HP numbers, but before put the other one 044 pump.

[Biturbo]

How is the build coming along?

Mister Kamutas will help you to push to the right HP numbers, but before put the other one 044 pump.

I will ask him tomorrow.In this car your valve springs set and working good so far

[FCP-ENGINEERING]

Yes i know , strong springs for muscul Audi

[Biturbo]

Today in Santa pod was not very good.Lots triger erors.Then test on street was fine,but from start with lounch control is very bed.Car really has power.I was runing with street tires so lots wheel spin, 60ft around 2s

[will20v]

oops its slower

[will20v]

chuck the vems in bin and put the motronic back on

[Biturbo]

chuck the vems in bin and put the motronic back on

Is 13s with cuting engine on 6500rpm.Will sort this small fault ant this car go much better.This was just first test and now I know that I need sorting.Will20v I wont see your car in santa pod strip

[will20v]

no i wont take mine till its ready 10.6 on motronic

[FCP-ENGINEERING]

Will turn engine to 8000rpm will be 11,00
In street all cars feals powerfull

[Biturbo]

no i wont take mine till its ready 10.6 on motronic

Is to expensive mapping motronic every time you change some bits.Yes I saw that your 10.6s run in real .Like I said, when this car will be sorted all things and put more then 1bar boost hope go in 10s to .Plius NOS will be fitted for next year

[AndyP]

Today in Santa pod was not very good.Lots triger erors.Then test on street was fine,but from start with lounch control is very bed.Car really has power.I was runing with street tires so lots wheel spin, 60ft around 2s

You beat the tractor though, right??

[Greg_S]

Not a bad first run and looks a bit damp too. Can see why your sticking with the VEMS though in terms of being able to tweak and remap more easily

[Biturbo]

Not a bad first run and looks a bit damp too. Can see why your sticking with the VEMS though in terms of being able to tweak and remap more easily

It was bed.Now we know that problem by looking in vems logs.It was all time in over boost,that biggest problem that day.My boost target was 1bar and over boost was 1.4bar but I got 1.5bar and cut.It was my mistake I forgot put ring under wg .Now spool coming at 3500rpm.I like vems with all good things hi had,like lc with antilag,shift light,egt and all other things see in display