Urs4 2.2T litle project

[Majorcina]

With time i will,but now this one have to do the job
Here some update from today






Buyed evry fluid exept for gearbox and diff

[Vorsprung durch Technik]

Looking good Marko. Is the factory sticker the original on the slam panel? Or can you get these?

[Majorcina]

Thanks Yes it is factory sticker

[Majorcina]

Finaly

https://www.youtube.com/watch?v=mIC7OXN7_rU

p.s. if some can put the video to see directly since i dont know

[igor136]

Beautiful

[pasbogdan]

Do not forget about new colant expansion tank

[Majorcina]

I know what u mean i need some hoses to tighten including that one

[Majorcina]

This is how the engine work 30 sec after fire up https://www.youtube.com/watch?v=rboy...&feature=share

[Bowie69]

Sounding sweet

[irishs2]

Very cool, nicely done and good job on tracing the fault.

[geneandbolly]

Finaly

https://www.youtube.com/watch?v=mIC7OXN7_rU

p.s. if some can put the video to see directly since i dont know

awesome job!! the sigh of relief at the end of your this video is well justified!!

[rs200]

This is how the engine work 30 sec after fire up https://www.youtube.com/watch?v=rboy...&feature=share

do you understand now what mean good ignition coils ?

nice job.. I'm proud on you !

[rs200]

you put a blow off valve on opposite direction.. turn it on other way !

[geneandbolly]

can i be rude and ask you how much this lot has cost and how many hours labour costs you've saved by doing it yourself??!

[Majorcina]

Thank you guys
igore,i know it is on oposite direction,but i change that cople od days ago
@irishs2,yes it was damn hard to source it,but if i didnt get support from here i belive i wouldnt find it on my own,again big thanks on infos
@geneandbolly,i started the project with 2100e and i was sure i will have done it with that money,but for now i spend around 4000 and litle more,and i am not done yet(a lot of stuff buyed but no photos ...)
For mehanical and electrical work which i did by my self(i only didnt do preparation for painting and painting,all other by my self)i belive i saved 1000e+ by doing it by my self.The main problem is that no one would acept job like this since no one here know to work on this cars