My sleeper

[Audi_CQ]

Have to admit that your's bigger then mine

[hammer]

4" downpipe

[macspring]

Orginal the i5 have an imbalance on the Vibration damper and on the flywheel the same to make them Run harmonic. Many people install a Fidanzer flywheel wich have no imbalance and the ran without a Problem, so i think it should not be a Problem. But I will see.




Learning by doing[emoji4]

Agreed - Interested to see what happens in a good way.

Nice standard of work on your lathe and turbo.

Way beyond me.

Looking forward to your further progress.

[hammer]

Upgrade for my ex housing from 3" up to 4" [emoji41], for 4" downpipe

[hammer]

No i have "some" work to do. 4"downpipe, fuelrail and Pumps....

[V6quattro]

V6quattro have you installed a Poti like this

Yes i have used that. Some information how i did it:

http://www.s2forum.com/forum/showthread.php?t=69047

Did you already drive it?

[hammer]

Electric steering is from a Opel corsa c

And i installed the steering column from my s2. The older electric steering from Opel are smaller then the one i have

[hammer]

Ok Thanks

[pcfnet]

its always good to see something like this, truly amazing

[Thuppu]

The front balancer is for damping harmonic vibrations in the crank. Without it there is a risk to snap the crank. Don't know if it's a big risk though, maybe not..? Not sure the FW has the same purpose.

But anyway, nice project. That electric power steering would be a nice mod.

[hammer]

V6quattro have you installed a Poti like this

[hammer]

We'll need more info on this! I've been kicking around the idea for my 90. Are you running a manual rack? [emoji481]

No its the original hydraulik

[hammer]

Does the I5 engine not need the original big heavy oem pulley to maintain the harmonic balance of the engine ? Just curious.

Thanks.

Orginal the i5 have an imbalance on the Vibration damper and on the flywheel the same to make them Run harmonic. Many people install a Fidanzer flywheel wich have no imbalance and the ran without a Problem, so i think it should not be a Problem. But I will see.
Learning by doing[emoji4]

[Mcstiff]

I'd be great to see a pic of the column outside of the car so we can see how everything is spliced together.

[hammer]

Did you allready have driven with this? I have the same setup but im not really happy with it at the moment. It is vague in the middle and does not self center as good as i would like. Can you pleas post more photo's off your setup?

No Not driven in this car but i installed the same in another car and it works fine.
I thougt in my car it will self Center because i have ~8° overrun.
from what you wana see photos?