My sleeper

[hammer]

Some updates


New steering from a Ford Galaxy

A little bit over 2 lock to lock


Gesendet von meinem PLK-L01 mit Tapatalk

[BATCH]

noce sleeper

[hammer]

Some updates.
Looking for a other steering rack, because I don't like how the oem work.
Also wait to get the oil pump gears from milling.

Get my new ex housing 1.45[emoji4] and it look big[emoji41]


Gesendet von meinem PLK-L01 mit Tapatalk

[hammer]

Oem 2,2 crank is balance front and back to ~0
Oem 2.5 crank is balance front and back to ~60g.
Is i think i have to look whats the bob weight fron tdi, than the bobweight from my new piston and drill the different from each counterweight of the crank. Than balance it with my bob weight to 0.

Gesendet von meinem PLK-L01 mit Tapatalk

[hammer]

This should help...

http://theprojectpad.com/viewtopic.php?f=32&t=325

Sent from my HTC One using Tapatalk

The all just talk about 2.2 crankshaft.

Gesendet von meinem PLK-L01 mit Tapatalk

[altmanis]

He did it with damper, flywheel and clutchplate.
I think, when you do it with all that things, it has to be right.

[hammer]

Hi,

I also buildt up a 2.5l with 95.5 crankshaft.
I let my crankhaft balance by a specialist in Laakirchen, Upper Austria and he also said, that you dont have to use bob weights.
First he thought, that I need bob weights, but than he tried it without the weights on low rpm and he said it is perfect.

I know them, but the balance to 0 what is wrong. Also the damper and oem flywheel have every 25g unbalance.

Gesendet von meinem PLK-L01 mit Tapatalk

[Wizard-of-OD]

I'd go elsewhere.

You ABSOLUTELY need a 50% bob weight to balance the crank.

[PRY4SNO]

I'd go elsewhere.

You ABSOLUTELY need a 50% bob weight to balance the crank.

[altmanis]

Hi,

I also buildt up a 2.5l with 95.5 crankshaft.
I let my crankhaft balance by a specialist in Laakirchen, Upper Austria and he also said, that you dont have to use bob weights.
First he thought, that I need bob weights, but than he tried it without the weights on low rpm and he said it is perfect.

[mushasho!]

This should help...

http://theprojectpad.com/viewtopic.php?f=32&t=325

Sent from my HTC One using Tapatalk

[hammer]

Once again engine out
Crankshaft is not bent.
Next time i drive to a company how are specialized in balance. A worker from this company say that i dont ned bob weights for Balance a i5 crank....

Gesendet von meinem PLK-L01 mit Tapatalk

[hammer]

Would you make more on request?

Sent from my LG-H955 using Tapatalk

Yes, but first i have to test it.

Gesendet von meinem PLK-L01 mit Tapatalk

[All_Euro]

Thought I’d take a little peek at your “sleeper” project and now it’s 20 pages later... nice work!!

[diesel des]

Would you make more on request?

Sent from my LG-H955 using Tapatalk