UrS4 2.2T Sedan project

[s0_big]

The car is not dead (not me either) been to much work and to little playtime... I installed a 3mm restrictor on the oil feed line to the turbo but it still leaks just a little.. I will try to live with that until i buy a new turbo some time. Made a little video of my testdrive yesterday with my new Gopro Hero 6. Further on i will try to get the car ready for MOT and hopfully they will let it through this time to. But we will find out soon

[s0_big]

what diameter is oil return hose from turbo >?

I run with a AN 10. Worked good for 2 tears.

[sailaz]

what diameter is oil return hose from turbo >?

[s0_big]

Hi!
Did the first test with the car yesterday. Car drove wery well and feels nice. Unfortunately my turbo is still leaking (on the same place as before the repair). I got info from some guys and they told me that maybe i need a oil feed restrictor. I ordered a 2mm restrictor to try out if it will solve my leak.. Do any body else here needed to fit an oil restrictor to a journal bearing turbo? A little bit mad at my turbo at the moment.

07cd65446de39783.jpg

[s0_big]

It doesen't tell on the info. But i will find out how good it holds up.

[sailaz]

Looks nice for sure. What temperature can withstand that folie? Is it specified?

[s0_big]

Today i got my thumb out and installed a fuel pressure sensor. With the help of forum member "Jonas_R" i got a adapter for the original fuel lines to put a sensor to my Maxxecu in. I painted sensor and adapter black to make it blend in better with the other stuff. Big thanks to Jonas for making the adapter i needed for so long as 034motorsport didin't make them any more.
Fuel pressure sensor installed and wired:
20180304_124726.jpg I also got a the ac/fan belt cover and coil/connector cover wrapped in carbon fibre folie. Looks pretty nice i think:

20180304_124640.jpg

[s0_big]

Hi

Got the same flywheel/clutch setup but struggling to get the clutch to stiffen up. We moved from the original dual mass... Any tricks i should know about? Great build btw, and a big help for our project!

Not sure what you mean with stiffen up the clutch? Edit, i answered in your other thread. Thanks

[amarider]

New flywheel and clutch disc

Hello! Yesterday i received my new alu-flywheel and clutch disc.






Mounted it to the car today also with a new clutch cylinder because the old one was leaking i think. So tomorrow i will sure know if this works fine with the Maxxecu. I hope so A shame to hide these nice pieces but atleast i know that they are there

Hi

Got the same flywheel/clutch setup but struggling to get the clutch to stiffen up. We moved from the original dual mass... Any tricks i should know about? Great build btw, and a big help for our project!

[sailaz]

https://www.s2forum.com/forum/technical/transmission/1170-billcatz-short-shifter-modified/page4

[s0_big]

Not much has happend with the car. But i have bought some more parts for it at least.. Stumbled over a 034-motorsport short shift kit that i was forced to buy.. I'm happy with the shifter as it is, but with this kit it may be even better i hope. Does any one here have some experience with this kit?

filedata/fetch?id=2015489&d=1518128818&type=thumb

[s0_big]

hello.. what manifold was it you have.. was it from cp-s? did you ever make a bracket to hold the turbo?.. nice build

Yes it was from CP-S and made from stainless steel. No i didn't, but now i will make one to prevent the manifold from cracking.. =)

[s2dk]

hello.. what manifold was it you have.. was it from cp-s? did you ever make a bracket to hold the turbo?.. nice build

[V6quattro]

Mmm strange, let hope it will hold up better now yes!

[s0_big]

Around 6000Km so not wery much.. Hopfully it will hold up better this time.