Titanium Grey S4 Avant

[hunker7]

Same as on mine.

[UrS4boy]

Same as on mine.

Yes. I know. What I am showing you is you are missing the threaded studs on yours. Or the bit in your spoiler photo needs to be removed from the inside of the hatch (some trim off) and re-attached (epoxy or fibreglas resin, etc) to the spoiler.

[hunker7]

I am not. One of them were broken out of the spoiler,and glued back in and today it broke out again. On the other side I have a threaded stud

[hunker7]

Does anyone know where to get air-con compressor main bearing, or know they size for one?

[sailaz]

take it out and go to specialized bearing shop and they will find for you in place; at least I did that way

[hunker7]

take it out and go to specialized bearing shop and they will find for you in place; at least I did that way

Thanks buddy, I might actually have a spare compressor I could take apart.

[Jack4688]

If you're back up in Yorkshire any time soon Spen Bearings might be worth a go, there's one in Leeds and one in Cleckheaton. We've used them at work for CNC machine replacement parts

[hunker7]

Won't be in Leeds for some month, but they seem to have a website so I'll see if they can help. Thanks

[hunker7]

I have all the parts needed to get the head restored etc. Because I am taking off inlet/exhaust manifold and all the pipe work I thought I'll take off the head and put new seals in etc. But it isn't eating oil, don't have any smoke on start up either. Would you do the head while everything is off, or leave it till it goes wrong?

[ringbearer]

If you have the money and a good machine shop, do it. Or at least have it checked out.

[Majorcina]

I wouldnt touch it

[hunker7]

If you have the money and a good machine shop, do it. Or at least have it checked out.

I wouldn't do anything major, just new seals, skim the head and possibly port it, but there is no oil consumption or smoke on start up, so it feels like pointless thing.

I wouldnt touch it

I start to think the same

[hunker7]

Someone thought they can get like 3000 boosts by doing this, all it did was made a very annoying sound.

[McX]

its been done couse of sound

[hunker7]

How on earth can someone enjoy it? Is that how induction kits sound like?