How's the work comming along on your S2, Doug? You should have a stonker once it's finished. 
-
-
I got the missing turbo to coolant adapter yesterday.
I am going to cut the metal pipe on the inlet so it is a bit bigger diameter (it is designed to connect to the ribbed pipe so reduces in size) but I need a new silicon hose the current one will do just now.
Doing the Mark Oil Catch Tank Mod as well.
I decided to make up some custom oil and water hoses for the top of the turbo - might as well do it properly - in for a penny, in for (thousands) of pounds
Everything just needs bolted on the car - I was hoping it would be tonight but got the flu - so she won't let me out :mad:
Need a heat sheild but the way the filter sits now, it should be easy to get a shaped sheet of metal in there.
It will get remapped as soon as Mihnea finds the time - hopefully the next few weeks - that could be a good excuse to meet up with a few guys down south way?S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
Will be nice to meet the rest of the S2 crew, not sure if I qualify, I don't own an S2! BTW where is Mihnea based, and how does he come down to map cars in the UK? (I take it he lives abroad?) :confused:Comment
-
20" wheels is a good enough qualification for meOriginally posted by Vagsport
Will be nice to meet the rest of the S2 crew, not sure if I qualify, I don't own an S2!
Mihnea is from Belgium - I think he just comes through that big tunnel thing - I probably have to travel further than he does
BTW where is Mihnea based, and how does he come down to map cars in the UK? (I take it he lives abroad?) :confused:
(if he is doing the remapping round London)
S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
Doug.....come on downOriginally posted by Doug_RS2
It will get remapped as soon as Mihnea finds the time - hopefully the next few weeks - that could be a good excuse to meet up with a few guys down south way?
S2 Avant......fully loaded :rock: :bow: Slipper Wagons Rule !!!!!Comment
-
20" wheels are cool, the amount of work required to get them to fit is NOT cool, you were right about the spacer sizes, 60mm front and 70mm rear. :eek2: :eek2:Comment
-
They aint spacers, they are brake discs!! infact why don't you make them into hand brake discs and rig a caliper over them???
Doug, just to the right of the Lambda probe in your picture, there's something black with I love Audi on it? what gives????
Comment
-
True. I see it. Thats quite funny really.sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
I'll need to go and see what that is - weirdOriginally posted by Martynf
Doug, just to the right of the Lambda probe in your picture, there's something black with I love Audi on it? what gives????
S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
Still don't know what it is but it does not say LOVE
Maybe you lot have Sweepers sister on your brain
S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
Turn that picture upside down. If you squint your eyes then it does.sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmComment
-
One day it will be finished - tomorrow for sure - final bit of plumbing left to do - WGFV.S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
I forgot i only have one blacked out headlight - better get that done tonight.
Another picS2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
-
how easy was it to do the wastgate top spraying it?Greg
S2Forum.com Administrator & Webmaster
'93 Coupe with a few tweeks
Comment
-
Real easy to spray that - just take it apart - used that hammerite chrome radiator spray paint.
Greg - you will probably have to take off the cap and loosen the top hex nut - Is mihnea going to stick a bigger spring in yourrs?S2,RS2,S4 WB,RS4,S4 B8,RS6 C5,RS6 C6,R8Comment
Comment