Audi s2 with a few updates

[rxl]

The rear is almost complete. Filled the diff with oil and just need shims for the Driveshafts as I lost the old ones. Mini brakes are in.

Gesendet von meinem EVA-L09 mit Tapatalk

[Arnout]

I'm enjoying your updates tremendously from my lazy couch . God job zo far! Thanks also for posting some of the sources of your parts. With Audi parts getting rare and very expensive, that's very helpful.

[rxl]

3 out of 4 wheels ware not straight so got them fixed and refreshed. Also got a skid plate

Gesendet von meinem EVA-L09 mit Tapatalk

[rxl]

Got the head refurbished and updated all the internals.

Gesendet von meinem EVA-L09 mit Tapatalk

[rxl]

Front subframe is in and the y pipe is also ready for the setup redused to 2x60 for the cats..

Gesendet von meinem EVA-L09 mit Tapatalk

[Greg_S]

Been following this thread for a while now, great to see it all coming together now. just re read the thread too

[rxl]

Been following this thread for a while now, great to see it all coming together now. just re read the thread too

im also glad that i find the time to work on s2.. not so often as i would wish.. have a bunch of parts gathering dust but i think in spring it will be drivable and till winter will enjoy it and after that will be the next step.

[Greg_S]

I can relate to that too, I’m really close to finishing renovations on my house and can dedicate some time to getting parts I have fitted. Trying to get over the flu atm tho

[rxl]

Few hours spent for the front axle. Need to order front Driveshafts and do the brake lines for the front and the suspension will be finished.

Gesendet von meinem EVA-L09 mit Tapatalk

[rxl]

Testified all the shiny gearbox parts and measured the length of the bolts that I need to order. Also fitted the shifter box. Really tight and had to trim a mm of the sides becouse it would fit so.

Gesendet von meinem EVA-L09 mit Tapatalk

[Greg_S]

Which shifter mechanism have you used ?

[rxl]

It's a custom made from rs4 b7

Gesendet von meinem EVA-L09 mit Tapatalk

[Greg_S]

Nice solution, was it a straight forward swap?

[rxl]

well the shifter box has different mounting point. 2 lower ones fitted the original holes but had to drill a bit bigger and the upper ones had to mesure and drill out. took me half an hour becouse mesured like 10 times.. didnt want to make a mistake there.

[7Aquattro]

Hi rxl,

nice car!

Is that a 0A3-transmission from a B7 RS4? What drive shafts do ýou want to use?

Cheers,

Gilbert