Thank you John to make this happen!!!
Announcement
Collapse
No announcement yet.
WTB: S2 aux gauges, face only
Collapse
X
-
Originally posted by nribs View PostHey John, any update on the Main dials? I recall you saying the vendors turn around was pretty slow.
Yes, actually the main dials arrived this week!
Thing is I had my personal running gear replaced last Saturday (bilateral total hip replacement, yeah that’s both sides at once) so haven’t done anything more than look at the packet since I’m concentrating on recovery, resting, physio and getting the new legs working.
I’ll ask the Mrs to get me some mailing supplies in and I should be able to get them ready for posting this week.
In the meantime if everyone can PayPal the money that would be great.
Tractor Dave x1
nribs x 1
Raoul x 1
Rikki Kitto x 1
Steve770 x 1
Total with first class post will be £85.
If you want insurance or special delivery I’m happy to do it but it will be extra, PM me and I’ll get it priced up.
John
Comment
-
Main dials!
Tractor Dave
nribs
Raoul
Rikki Kitto
Steve770
Main dials were posted out yesterday, should be with you very soon! I have tracking info for them if anyone needs it.
Comment
-
Originally posted by nribs View PostDave, how hard was it to remove the needles for the main cluster? Did you just "twist and pull"?
If you have a newer cluster from about 95 on (has torx screws on the Speedo and rev counter fronts instead of flat bladed screws), you can't used the dial past the stop method as it destroys the internal return spring in the stepper motor. You must use the spoons method and the needles are tight! The black needle cap will probably break off but easy to superglue back on.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Originally posted by Tractor Dave View Post
Not too bad at all. On the Speedo and Rev counter I dialled the pin clockwise past the stop and keep going. Pull gently after the stop and needle comes off. I don't trust this method on the fuel and temp gauges. Here I used the two spoon method, gently levering up.
If you have a newer cluster from about 95 on (has torx screws on the Speedo and rev counter fronts instead of flat bladed screws), you can't used the dial past the stop method as it destroys the internal return spring in the stepper motor. You must use the spoons method and the needles are tight! The black needle cap will probably break off but easy to superglue back on.
sigpic
Comment
-
We need a forum meeting this year, me and Dave can bring our tools
- 2 likes
Comment
Comment