WTB: S2 aux gauges, face only

[varia]

Thank you John to make this happen!!!

[sjw185]

Yea thanks John received mine also

[pfi]

Received mine today, Thanks !

Anyone got a description of how to change them ?

[varia]

Received mine on last Friday, thx!

[nribs]

Hey John, any update on the Main dials? I recall you saying the vendors turn around was pretty slow.

[newsh]

Hey John, any update on the Main dials? I recall you saying the vendors turn around was pretty slow.

Hi Nick
Yes, actually the main dials arrived this week!
Thing is I had my personal running gear replaced last Saturday (bilateral total hip replacement, yeah that’s both sides at once) so haven’t done anything more than look at the packet since I’m concentrating on recovery, resting, physio and getting the new legs working.
I’ll ask the Mrs to get me some mailing supplies in and I should be able to get them ready for posting this week.
In the meantime if everyone can PayPal the money that would be great.

Tractor Dave x1
nribs x 1
Raoul x 1
Rikki Kitto x 1
Steve770 x 1

Total with first class post will be £85.

If you want insurance or special delivery I’m happy to do it but it will be extra, PM me and I’ll get it priced up.

John

[newsh]

Main dials!
Tractor Dave
nribs
Raoul
Rikki Kitto
Steve770

Main dials were posted out yesterday, should be with you very soon! I have tracking info for them if anyone needs it.

[Tractor Dave]

Mine have arrived safely. Thanks very much for doing this John.
Top bloke you are.


Sent from my iPhone using Tapatalk

[Rikki Kitto]

Got mine cheers bud

[Tractor Dave]

Fitted mine already.

Nice quality.


Sent from my iPhone using Tapatalk

[nribs]

Dave, how hard was it to remove the needles for the main cluster? Did you just "twist and pull"?

[Tractor Dave]

Dave, how hard was it to remove the needles for the main cluster? Did you just "twist and pull"?

Not too bad at all. On the Speedo and Rev counter I dialled the pin clockwise past the stop and keep going. Pull gently after the stop and needle comes off. I don't trust this method on the fuel and temp gauges. Here I used the two spoon method, gently levering up.
If you have a newer cluster from about 95 on (has torx screws on the Speedo and rev counter fronts instead of flat bladed screws), you can't used the dial past the stop method as it destroys the internal return spring in the stepper motor. You must use the spoons method and the needles are tight! The black needle cap will probably break off but easy to superglue back on.

[varia]

Not too bad at all. On the Speedo and Rev counter I dialled the pin clockwise past the stop and keep going. Pull gently after the stop and needle comes off. I don't trust this method on the fuel and temp gauges. Here I used the two spoon method, gently levering up.
If you have a newer cluster from about 95 on (has torx screws on the Speedo and rev counter fronts instead of flat bladed screws), you can't used the dial past the stop method as it destroys the internal return spring in the stepper motor. You must use the spoons method and the needles are tight! The black needle cap will probably break off but easy to superglue back on.

Whit this (older style) you can lock the shaft from behind, and turn the needle counter-clock wise.

[Rikki Kitto]

Looks nice bud probably do mine in about 2025

[newsh]

We need a forum meeting this year, me and Dave can bring our tools