Announcement

Collapse
No announcement yet.

Ecumaster emu classic vs ecumaster black

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    OEM 5 cyl pedal is from the TOP...OEM TDI pedals are from the ground (mounting) So maybe the best and easiest option will be to adapt stock pedal box, isnt it?
    Audi Coupe Quattro 2.3 20V

    Comment


    • #17
      Originally posted by prj View Post
      It depends strongly on the stock ECU and how it acts.
      If it has e-throttle and torque management, then probably no (ME7 and up).
      If it is an older ECU with cable throttle, then probably yes.

      Why not adjust the stock ECU map?
      Old ecu with cable, Hitachi MMS-200/300. Don't know if this can be tuned, and if so how it would act with positive pressure..?

      Audi UrS4 Avant 2.5 20vt - twincharged - Project
      Audi 80q B4 Sedan 2.2 20vt - Daily user
      BMW 320d Touring e91 M-Sport - Daily user
      BMW 740iA e38 - Project

      Comment


      • #18
        Originally posted by Tom_ View Post
        OEM 5 cyl pedal is from the TOP...OEM TDI pedals are from the ground (mounting) So maybe the best and easiest option will be to adapt stock pedal box, isnt it?
        No, TDI pedal box is the same arrangement.

        https://www.s2forum.com/forum/member...31#post1345031
        Panthero Coupé quattro 20vt
        Indigo ABY coupé
        Imola B6 S4 Avant

        Comment


        • #19
          Thanks Alex, i look on your topic...stuning work as alwaysDoes have that TDI pedal box some OEM number?
          Audi Coupe Quattro 2.3 20V

          Comment


          • #20
            Hi

            Which ECU did you end up going for?

            Comment


            • #21
              Ecumaster black, but not installed yet as engine is not finished :/
              Audi Coupe Quattro 2.3 20V

              Comment


              • #22
                Черный, без настройки выше 0,4 бара

                Comment

                Working...
                X