part# 955 351 421/422-70 for the calipers.Personally,you might fit the generic 18ZR/ZL red cayenne calipers on these HP2 strut too.
Fitted New Cayenne Calipers on UrS6.
Collapse
X
-
-
Comment
-
for 17ZR,ZL calipers you would need 330mm Rotors with some slightly grinding job on the mounting bolts,18ZR has slightly longer on the bracket for the bigger rotor,i think it would need 350mm rotor discs.Anyway,everything needs to try out. you might try to mount the calipers with pads on the struts and measuring what's the size of the rotors they required.This method is straightforward and least error in this case.you just measure them from the center of the hub to the outer side of the brake pads.
now you will have radius value and then multiply by 2.you will have the rotor size on your hand now.
one of a few I5 from Asia.Comment
-
Well i will have some photos of 18ZR calipers on Urs4 with HP2 struts.the car is belong to the friend of mine.He was using multi piece 360mmX34mm Discs.will try to post ASAP.one of a few I5 from Asia.Comment
-
Comment
-
Wow, this is a nice mod. The calipers are enormous!
I have also a set of Brembos lying around and have ponder to do a similar mod to get rid of the UFO-brakes. They are also very big Range Rover Sport 4-pot calipers and would need 30x340-360mm size disc. I would have to change my winter wheels from 16" -> 18"...Last edited by Thuppu; 15 September 2010, 09:33.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - ProjectComment
-
Very nice..brilliant really!



Comment