Big Brake upgrade??

[Monkeymagic]

i called camskill. i thought it was a person then realised it was a company. what an idiot. anyway after one guy called Will bought some discs they've sold loads! I've got to call them Tuesday and they.ll order some. all need now is flex i and some quality brake fluid. might make it round the ring yet

[willg54]

Haha I should be on commission! I've had loads of friends order them now. You'll have them by weds too

Sent from my GT-I9300 using Tapatalk 2

[Big Lee M]

[QUOTE=geryS2;665852]Regarding rear brakes upgrade, what s a bolt on setup upgrade for a S2 avant ??

i hear it s actually easyer to do one on a S2 avant than an RS2 due to the hanbrake,

Best rear brake upgrade on a avant is the B6/B7 300mm set up, it's a direct bolt on job and it make a huge difference. I also had that set up on my avant with the Porsche mono blocks and it was really good braked level and stopped on a dime.

[geryS2]

[QUOTE=Big Lee M;665976]

Regarding rear brakes upgrade, what s a bolt on setup upgrade for a S2 avant ??

i hear it s actually easyer to do one on a S2 avant than an RS2 due to the hanbrake,

Best rear brake upgrade on a avant is the B6/B7 300mm set up, it's a direct bolt on job and it make a huge difference. I also had that set up on my avant with the Porsche mono blocks and it was really good braked level and stopped on a dime.

ok, thanks for info, but with which caliper ?(porsche monoblock also at the back ?) and 300MM B6/B7 are from front or rear ?

any info or thread related ?

thanks again

[afterburner]

Can normal B4 front 280x22 mm discs and single pot calipers be used on the back of a sedan/avant? Without the cable handbrake, of course. I have some suspension parts and form what I can see the distance between the mounting bolts of the carriers is the same front/back.

[irishs2]

I just placed an order for 8 grove on camskill, I couldnt find the product on their site but after contacting them they have these listed

323mm:

8 Groove: £99.95 http://www.camskill.co.uk/m13b0s744p80173/


12 Groove: £139.95 http://www.camskill.co.uk/m13b0s744p109236/


16 Groove: £149.95 http://www.camskill.co.uk/m13b0s744p109237/

[snaak]

I am looking to swap the original BIG-red calipers on my RS2 for Monoblock's because of the constant maintenance those old Big's need, are the Porsche GT3/996TT calipers a straight bolt on to the brackets and the original 323 discs or should I use the 996 C4's?

[Error404]

GT3 / 996TT are a lot bigger than your Big Reds, they have a different mouting bolt spacing and they are designed for thicker discs.
You want the normal 996 / Boxster S calipers, which should be a straight swap IIRC

[snaak]

So I should use 996.351.425 and 996.351.426. I know these fit on a s2 with s8 discs and rs2 calipers, so they should fit the 323 big red discs of the RS2 without problems? I thought the rs2 discs are too thick for these calipers?

[snaak]

I meant rs2 brackets not calipers