Where the hell would I find this?!?!? I cannot find the plug at all. Need to wire in a clutch pedal switch into pin 39 of the ABY ecu. I could just solder into the ECU plug end of the loom, but thought I would try and keep it neat.
Announcement
Collapse
No announcement yet.
Coding plug T6d......
Collapse
X
-
Coding plug T6d......
sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nmTags: None
-
What’s the clutch switch for Tom?
-
Making fire come out the exhaustsigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nm
- 1 like
Comment
-
Will be putting the Sachs race clutch to the test using launch and no lift shiftsigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nm
Comment
-
Crikey!
Comment
-
You should find it near the ECU / barometric pressure sensor, it's 6 pin black.
Looks like this:
893971833.jpg
What ECU / software are you using with flatshift Tom?
Just FYI, calibrating/setting the clutch switch position is important so using a generic flat-shift or launch strategy will take some fiddling to make it work correctly.Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 Avant
- 1 like
Comment
-
Nothing generic with this! It’s being custom tuned on Saturday I hopesigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nm
Comment
-
Must be behind the little kick panel on the left of the car. It’s not by the ECU. I have to take that off anyway to remove the procon 10 cables and some old alarm wiringsigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nm
Comment
-
Originally posted by audiman View PostMust be behind the little kick panel on the left of the car. It’s not by the ECU. I have to take that off anyway to remove the procon 10 cables and some old alarm wiringNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
- 1 like
Comment
-
Originally posted by SteveH View PostIs Mik using a 12v feed from the clutch switch for flat shift?
sigpic
Tom C - www.rcmr.co.uk
Audi UR Quattro
Audi 100 C3 2.0 5 cyl 115ps
Audi S2 - 07k engine project aiming for 800ps
Audi B5 RS4 645ps 911nm
Comment
Comment