Multi Function Temp Switch.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bosscat
    S2Forum Fanatic
    • Feb 2006
    • 95
    • Home: United Kingdom Current: Scotland

    #1

    Multi Function Temp Switch.

    Trying to double check the wiring to the MTF on the water manifold on an /aby avant.

    First - 4 connectors attaching into a 3 pin switch - ?? (new switch)

    Next thing is the colour identification of the wires to each connector ?? -After twenty years these are not the brightest on the planet.

    Also there is the access - its NOT an easy place to live - loom wires are quite short !! - Think I might need to remove the radiator to get better access.

    Any one got any experience of this job.

    Martin.
  • Ross
    S2Forum Possessed
    • Aug 2005
    • 3399
    • Country: England

    #2
    I think you'll find all the info you need in my thread:



    Tell me about the access, i was able to get a little more length on the wire by threading the spur with the MTFS thread back behind a breather pipe and moved the hydraulic lines a bit. Cutting off the old plug, and fitting a new one with a few inches of loom 'extension' attached seems like the best way to go.
    AUDI - saving Dad's from minivans since 1994

    Comment

    • Bosscat
      S2Forum Fanatic
      • Feb 2006
      • 95
      • Home: United Kingdom Current: Scotland

      #3
      MTF wiring

      Thanks Ross.


      I must be dumb or something - could not locate this thread on the search !!!

      I assume for us electrical apprentices - BR/BL means predom Brown with black stripe.

      Really could do with a cut off plug with wires still intack - tall order though!!

      Mutchas Gracias.

      Martin.

      Comment

      • newsh
        S2Forum Obsessed
        • Aug 2003
        • 16226
        • Country: United Kingdom

        #4
        Click on this LINKY!

        S2 Coupe 3B Project


        Ur quattro restoration

        S2 Avant

        Boost is the new rock and roll!
        sigpic

        Comment

        • Bosscat
          S2Forum Fanatic
          • Feb 2006
          • 95
          • Home: United Kingdom Current: Scotland

          #5
          MTF Problem.

          Mutchas Gracias ye ALL.

          Bosscat.

          Comment

          • UrS4boy
            S2Forum Obsessed
            • Feb 2006
            • 11859
            • Country: Canada

            #6
            Originally posted by Bosscat
            Trying to double check the wiring to the MTF on the water manifold on an /aby avant. First - 4 connectors attaching into a 3 pin switch - ?? (new switch).Next thing is the colour identification of the wires to each connector ?? -After twenty years these are not the brightest on the planet.
            I know you got your answer but if I had woken earlier (I am 9 hrs behind you and slept in), I would have given you this:

            RS2'd 93 UrS4 5 spd sedan
            94 UrS4 V8 6 spd manual avant

            Comment

            • Bosscat
              S2Forum Fanatic
              • Feb 2006
              • 95
              • Home: United Kingdom Current: Scotland

              #7
              MTF Problem.

              Huuum - Bought plug and wires from audi dealer - big wires ??

              Having trouble with the BLUE / YELLOW & BLUE GREEN in diagram.

              I have a BLUE-YELLOW/WHITE stripe sort of wire ??? Not to mention that YELLOW and GREEN becone a bit same-ish after 18 years approx.

              Anyone come accross this problem !!!!!coocoo:

              Martin.

              Comment

              Working...