Definitive Cam Belt Parts List - UPDATED WITH P/N's

**Briggsy** · 22 March 2006, 03:19

anyone got the part number for the crankshaft oil seal?

**Jon441cc** · 22 March 2006, 03:54

Front crankshaft seal = (034 115 147 A)

**Briggsy** · 22 March 2006, 04:05

thanks pal

**S2 Ant** · 22 March 2006, 23:32

have added the crank oil seal to the list at the top

**denniselbows** · 20 March 2007, 19:11

would the rs2 water pump fit the 3b engine and changed the idle for the aby unit my car gets a bit warm in traffic

**4WheelDrifter** · 20 March 2007, 19:12

An RS2 water pump won't fit a 3B without changing other parts.
The 3B water pump is used to tension the cambelt, the ABY/ADU has a separate tensioner.

**~~Corey~~** · 20 March 2007, 19:33

You would need to change the oil pump housing, the lower and upper cambelt cover and the backing plate but it is possible as all the mounting holes are on the block.

**pastures16** · 20 March 2007, 19:57

sorry to hijack anyone local ish to me want to do my belt ive all the parts but no crank locking tool

**~~Corey~~** · 20 March 2007, 20:05

What? are we not local enough???

**denniselbows** · 20 March 2007, 22:07

hmm a bit more than expected my have to think about that one

**PeteRR** · 21 March 2007, 10:25

I think I'd also include a new Hall Sender at the same time as a cambelt job if there was no record of it being done previously (Just the ABY/AAN only of course).

**S2 Ant** · 21 March 2007, 16:34

Been a while since i looked in on this thread, i'll see if i can update with some prices - its not as bad as you might think tho and the job is actually surprisingly easy, mainly due to the ease of access.

**MattS2** · 21 March 2007, 18:56

Originally posted by pastures16

sorry to hijack anyone local ish to me want to do my belt ive all the parts but no crank locking tool

Si,
I dont mean to upset Corey but why dont you give Jase a call at The Lion Garage.
They're about as local as you'll get and did an excellent job when doing mine.
Very reasonable price too.

Matt.

**Jamo** · 21 March 2007, 19:23

In the midlands i've found the following places in no particular order that are capable of S2 work without worrying.

Quattronics
MRC
Lion Garages
Church Road Garage
Midland VW

**~~Corey~~** · 21 March 2007, 20:06

Originally posted by MattS2

Si,
I dont mean to upset Corey but why dont you give Jase a call at The Lion Garage.
They're about as local as you'll get and did an excellent job when doing mine.
Very reasonable price too.

Matt.

Nothing to be upset about, we're not the only ones to do what we do (although some do it better than others

)

Definitive Cam Belt Parts List - UPDATED WITH P/N's

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment