Pedal for E-Throttle conversion?

[Airwolf]

can see that some people in here have converted to e-Throttle on their i5s.

im going the same way and are looking for a gas pedal that is bolt-on. Can somebody supply me with a part number?

running Maxxecu Race.

thanks in advance

[Rudpavv]

You can use a pedal from a TDI 80 B4

[Airwolf]

http://www.oemepc.com/audi/part_single/catalog/au/markt/RDW/modell/A80/year/1995/drive_standart/150/hg_ug/721/subcategory/721055/part_i

this one?

[Error404]

You need the complete B4 1Z pedal box, and a gas engine throttle pot. Have a check of my project thread mate, all the info is in there

[s2dk]

Error. Could you plz put a link Up

[Error404]

https://www.s2forum.com/forum/member-s-area/projects/24534-20v-cq-tidy-up/page77

[M2ki]

No info on that page, you should link the post.
Users can change posts per page settings, so no point in linking to specific page.

You need diesel B4 pedal box and TPS from gasoline car. Like B5 and etc.

[s2dk]

Is there Any tb that has the s2 Stock pattern. For easy swap on inlet ?

[Airwolf]

Regarding the TPS from d2. Can i use from 4.2 for instans?

[grundey]

D2 - different bolt pattern. A solution would be a flange...

[grundey]

For a custom setup I use TPS and pedal from 3.2FSI/2.7biT

[Tom_]

Guys, what about electric throttle body? Any ideas? Best around 76mm

[Error404]

B5 RS4 / RS3 / TT-RS / RSQ3

[Tom_]

Alex, maybe 077133062A should be used either, right?

[Error404]

Yes but that one is larger - 82mm