Hi .Just wondering if anyone has got photos to share of S2 engine bay with Garrett GTX3071r Gen2 bolted on to K24 flange manifold?
Announcement
Collapse
No announcement yet.
Garrett GTX3071R -Any photos available ?
Collapse
X
-
Mine is a GT3071 on a Wagner RS2 Evo manifold.
I believe the GTX is the same size but a more up to date compressor wheel design.
It clears the chassis but you have to cut the leg off the airbox if you want to use a standard one.
-
Comment
-
That pic is from back when it was running a dizzy
Comment
-
I think i will go for middle size option but I will have to speak to Craig at Tdi Turbos first see what he will advise.
just want to see the GT series in the engine bay to have a general ide what it looks like
Shame that turbo hose between air box and turbo is nowhere near big enough to fit
Comment
-
Roose will make you a hose with a larger outlet for the compressor housing. Depends if you want to keep to stock airbox or not really. Since you won’t need the MAF anymore you have a few more optionsPanthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 Avant
- 1 like
Comment
-
Originally posted by Error404 View PostRoose will make you a hose with a larger outlet for the compressor housing. Depends if you want to keep to stock airbox or not really. Since you won’t need the MAF anymore you have a few more options
And I love the fact i can scrap the MAF.
Comment
-
Originally posted by AntsaDoesn't prjmod make motronic mafless?
Comment
-
Originally posted by Error404It depends on the turbine housing size.
Comment
Comment