2871R goes rather nicely...

[A80Avant]

talk about me having a heavy car then....

paul,can you tell me the 80-120km run how many sec was it ? or the mile equivalent. the g-tech has it on record.

[S2central.net]

All data is in that five page PDF.

[A80Avant]

oh ok!
thanks
by the way,did you see my pm?

[K7ERG]

Technical data from the owner's manual for the S6 Avant.

Gross vehicle weight in KG

Manual gearbox 2250 Auto gearbox 2285

Curb weight in KG (1)

Manual gearbox 1700 Autobox 1735

(1) These figures (minimum values according to EC standard 92/21 EEC) are for the basic model. The curb weight will be higher on special model versions and cars with optional equipment such as air conditioning, sunroof, and towing bracket, etc or if accessories are installed.


Craig

[A80Avant]

so UR S4 is the same as the S6 avant? didnt know that

by the way,just spotted that 60-80mph is 2.373sec and according to the PB best time i have ever done on a level road is 1.88sec.All others are around 2.3 to 2.4sec. So again my only 2nd gear g-tech power figure is by far off...

[K7ERG]

URS4 is basically based on the 100 which then became the A6 C4 shape
URS6 is the S6 with the 2.2 5pot 20v turbo which also came with a 4.2 V8 engine. Not sure if the URS4 came with the 4.2 V8 version.

Heavy car if you need to push it!!!!!

[A80Avant]

i looked up at carfolio and the 1991 audi 100 S4 with the 2.2engine was 1660Kg.Thats the figure i got.If the manual says 1700,then fine by me !

[urquattro-island]

yup

URS4 is basically based on the 100 which then became the A6 C4 shape
URS6 is the S6 with the 2.2 5pot 20v turbo which also came with a 4.2 V8 engine. Not sure if the URS4 came with the 4.2 V8 version.

Heavy car if you need to push it!!!!!

the urs 4 came with the 4.2 v8 299hp

[urquattro-island]

sorry

little fault by me there, the old v8 was only 280, the 299hp did not come until later. sorry

[EspenW]

Let us see the power graph frm 2000 rpm

Have you corrected the peak numbers for temperature, etc?

Looks like rollout is 0.94s, that seems mighty high for 12". Normally 12" of rollout means 0.3-0.4s lower times than no rollout.
Remember that rollout time must be added for "European" time to speed numbers. US publications usually publish 0-60, 0-100 times with rollout, making their times 0.3s+ faster than what the Euro mags print.

[Rocco]

sorry,stupid english noob question


WTF it´s the "stock botton end" ????

[DJones]

sorry,stupid english noob question


WTF it´s the "stock botton end" ????

As in the bottom end is standard no upgrades to the bottom of the engine.

[Rocco]

As in the bottom end is standard no upgrades to the bottom of the engine.

OK thank you





360hp on 1´7bar sounds more or less the same as the k24 7200 true???


where are the pros in the garret gt 2871 againts the k24 7200??

[A80Avant]

rocco, read the writtings correctly 360hp by g-tech is without any losses,which means if you add rolling resistance,air drag,driveterain losses = much much more than RS2 k24 7200 turbo,which has as MAX 380hp crank

[Rocco]

rocco, read the writtings correctly 360hp by g-tech is without any losses,which means if you add rolling resistance,air drag,driveterain losses = much much more than RS2 k24 7200 turbo,which has as MAX 380hp crank

sorry Hellas i did not understand the Gtech terms....

one more added to my small knowledge for today





430 crank HP without upgrade Rods the torque seems not more than k24 7200 true?? that it´s the worse problem for detroy the stock rods...

surelly i need a new remap in to my ECU but seeing this.... anyone wants to buy my brand new k24 7200 with 2000kms???