How was the kit to fit rocco? Easy diy? Specifically the wiring.....
Aquamist HFS3 in my Audi S2
Collapse
X
-
-
it takes many hours if you are doing a nice fitting job,like if you were doing a surgery
also,you need to build a custom tank,wiring,adapters,study how to wire everything and where... and the last step test and try... now is working like it should but the system has lot of features about how to setup. then you can play putting one,2 or 3 jets....depends on your taste
i am sure than DD will put another extra 50Hp at the crank with thisRED Mitsubishi Lancer Evolution VI TME nº 16 of 250
BLACK Mitsubishi Lancer Evolution VI TME nº 189 of 250
LWB Audi Sport Quattro projectComment
-
Prj:
What is your opinion about using denatured alcohol instead of methanol?Comment
-
Home of the World’s most advanced Water Methanol Injection systems We accept PayPal Aquamist Direct Full Line Choose We, the manufacturer of the Aquamist systems cannot guarantee next day shipping on orders received. Stock levels vary daily depends on the demands. However, we can guarantee we ship the latest and the greatest. All base prices […]
Well,I have found this in the aquamist forum.
I'm not an expert but I'd like to can interpret those graphs.
Dmitri,what do you think about this?
We are looking for the best water/methanol mixture ,so looking at graphic it seems that water is cheaper to buy and has better features true?
What do you think guys?RED Mitsubishi Lancer Evolution VI TME nº 16 of 250
BLACK Mitsubishi Lancer Evolution VI TME nº 189 of 250
LWB Audi Sport Quattro projectComment
-
From what I've heard, some people are (mis)using the screen washer tank...'93 Audi S2 Avant panthero black, 412.000km
'94 Audi S4 C4 Avant 303Tkm, KW, Brembos, BN-Pipes, Bose, S6 front (sold)
'93 Audi S4 C4 Avant, 260Tkm
'88 Audi 100 Avant turbo 44Q
'84 Audi 80 quattro tornado red
sigpicComment
-
Vas:
mix of meth/water or just water?
Also do you use the washer fluid tank for tje windscreen as well?
My plan was to run a 40/60 mix of denatured alcohol and water and use it for the windows and the carComment
-
Comment
-
it takes many hours if you are doing a nice fitting job,like if you were doing a surgery
also,you need to build a custom tank,wiring,adapters,study how to wire everything and where... and the last step test and try... now is working like it should but the system has lot of features about how to setup. then you can play putting one,2 or 3 jets....depends on your taste
do you have any photos?Comment
-
100% meth will always make the most power.http://www.aquamist.co.uk/vbulletin/...ead.php?t=2187
Well,I have found this in the aquamist forum.
I'm not an expert but I'd like to can interpret those graphs.
Dmitri,what do you think about this?
We are looking for the best water/methanol mixture ,so looking at graphic it seems that water is cheaper to buy and has better features true?
What do you think guys?
End of story.
P.S.
Latent heat != cooling. Meth cools the intake charge much better than water, due to the boiling point.Comment
-
Ok,we will try different mixtures then
Got 50 liters of water and methanol ,37 EUR for all.25 water/25 methRED Mitsubishi Lancer Evolution VI TME nº 16 of 250
BLACK Mitsubishi Lancer Evolution VI TME nº 189 of 250
LWB Audi Sport Quattro projectComment
Comment