MFTS delete?

[Laaf]

The right connector for it seems to be 443 906 231.

[Tractor Dave]

Just deleting my MFTS in favour of the Meyle two pin sensor. Can anyone who has done this confirm I need to cut the original plug off and fit two spade connectors or is there a two pin plug I can use. Which wire do I delete?
Cheers

[Error404]

Connector is the same as the PAS reservoir level sensor. I have some crimp terminals to suit in stock

[Tractor Dave]

Connector is the same as the PAS reservoir level sensor. I have some crimp terminals to suit in stock

Cheers Alex. I will send you a message

[johne]

The blue/white wire is the one going to the ECU so is the one to isolate. If it's a 4 wire MFTS they'll also be a black/blue wire which is the 12 volt feed that needs isolating too.

Blue/brown goes to the temperature gauge
Blue/yellow goes to the over temperature warning light

[Greg_S]

Tractor Dave could you post a quick guide and parts list as mine will need doing at somepoint as the connector has seen better days

[Tractor Dave]

Tractor Dave could you post a quick guide and parts list as mine will need doing at somepoint as the connector has seen better days

No problem