I agree with the above comment. Get some self-adhesive foam and repair the foam on the flaps in the heater box.Did mine whilst we did the matrix and it makes for a stronger air current, especially for de-misting the windscreen.
Announcement
Collapse
No announcement yet.
Heater matrix
Collapse
X
-
You need some of this
SELF ADHESIVE NEOPRENE SPONGE FOAM SHEET 8"x5" 1mm 1.5mm 2mm 3mm 5mm 10mm 20mm | eBayNothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
Originally posted by Bowie69 View PostThere really wasn't anything to match with on my flaps...
You can see the outline where it was and make a card template. I think the original was quite thin, maybe 2mm on mine or less.Nothelle S2 Avant
Black Ur project
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Comment
-
I took the flaps out, cleaned off old dregs of foam and adhesive and stuck the new stuff on both sides so it ends up about 4mm thick then trim excess off round the edges to tidy up. Most of the old was gone though, blown out of the air vents over a period of time.
Comment
Comment