As title, due to exhaust noise I could do with an upgrade. What size are the stock ones. What can be made fit that doesn't look max power. Cheers des
urs4 front speaker upgrades
Collapse
X
-
Tags: None
-
The oem frontspeakers are non-standard size, somehting between 5" and 5,25" (5,14" etc.). Here is a pic of a 4" DLS vs OEM. I did a downgrade from 5,14 to 4". Well, they sound better after all, luckily.

I made plug and play adapters for the 4" speakers to fit the OEM door enclosure.



Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project -
/\ /\ /\ I bet they sound good?
The Perfectionist
sigpic
Audi Class Concours winner Stoner Park 2014, ADI Concours D'Elegance Class Winner 2008, Runner up 2014. Winner, S2Forum Show'n'Shine Billing 2006 & 2008.
Comment
-
I managed to squeeze Edge 5.25", 130mm 210W component speakers in there - bought from sHalfords - they were a very good replacement at a competitive price!Comment
-
I had Audio In Motion in Bmth do it -they said they managed to squeeze them in.... it might take some minor massaging......but they fit and they are an ideal cost effective solution!Comment
-
-
Good info guys. Do the edge speakers sound much better than stock. Did you mount the component tweeter in the stock position. Cheers.Comment
-
-
Yes - they are the ones - the tweeter sits nicely in the original sitting quite nicely - best to have a roll of tape handy!!!! Compared to std: night vs day - the original are good speakers but they have had their day - and were born before deep house trance!Comment
-
Ok I have ordered a set. I'm going to power them of my 4 x 52 watt Sony head unit. Are yours amped. Cheers des.Comment
-
Was the oe speaker nokia or was a bose?worth changing Bose to dls?I did a dls swap in my 100 c4 but removing the plastic inside the dor and insulating dor and panel with special acustic insulator(how do you call it?).But bose worth to be changed with dls without removing the plastic acustic box and using the entire dor for acustics?Comment
-
Comment