I am looking for the round rubber/plastic dust washer from under the front top mount dust cover on my s2 . Are they dealer only or are they available
I am not having much luck finding them .
I am not having much luck finding them .
-
-
Do you mean the bump stops? -
No sorry I mean the washer that fits between the dust cap ant the top mount if that makes any senseComment
-
Still confused. On coupe at back there is a round foam disc. Do you mean that?Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
Okay, you mean the "strut stop" part number 811 412 319.
I think these went NLA a long time back. I don't see them on Tradition or eBay.
I think your best bet would be to post a wanted ad on here.
edit: there are some available on eBay but they are way overpriced.Last edited by Nuvo; 4 March 2024, 19:27.Comment
-
This thing Lou?
I've probably got one of these
Comment
-
I also have some if you are stuck.Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
You do not have permission to view this gallery.
This gallery has 1 photos.Comment
-
No 2 in the diagram is what I am looking forComment
-
What car is it for? Diagram looks unfamiliar
Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project goneComment
-
I have half a dozen of those if you mean the black plastic ring that goes on the outside of the upper sturt plate, which is what it looks like you're after.1990 B3 2.0 80 quattro.
1992 C4 2.8 Avant quattro
1994 MTM RS2.
1998 B5 TDI quattro Sport.
2000 B5 TQS.Comment
-
I am sorry for any confusion over both the part and the diagram . My s2 is at a garage having the strut mounts replaced as I am unable to work on the car myself any longer . I am going to the garage personally to try and find out exactly what they need .
many thanks for your help and apologies once againComment
-
This part is what is required .a pair of ,not sure if they come separate or not . I just need the plastic ring.You do not have permission to view this gallery.
This gallery has 1 photos.Comment
-
The plastic ring aren't available as a separate part it's bonded to the strut stop, they all split over time. You don't really need them.
You can use a rubber washer that sits below the strut stop as an alternative to the ring.
You can also use the strut stop from a TT or Mk IV Golf i think it is, these have a rubber bonded ring and the "hat" of the stop is a bit taller that the original item but it works. I'll post the part number for these once I find it.
edit: take a look at this page below for some details:
https://www.oemvwshop.com/1j0412319c-stop-p248889/Last edited by Nuvo; 5 March 2024, 17:00.Comment
-
Comment
Comment