-
-
i mean it isnt that big deal, 4 bolts on the upper housing 4 bolts on the subframe, 6 prop bolts and cut of 2 handbrake cables?
2hours work
One thing i've learned we are way behind the Scandinavians!Comment
-
.
Well, since i've joined the 'great unwashed'...i'm free any time...more hands quicker the job...
Any preference for a day next week?
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Comment
-
Comment
-
okey then, i might stay
better you move to norway then 
One thing i've learned we are way behind the Scandinavians!Comment
-
Er...
Difficult without an engine and front suspension...
Its my parts donor car.Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Carlos - get stripping my good man - and lots of photos along the way please in a separate thread !!!!Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
-
.
Thanks for all the support guys...
I'll be starting at 9.00am Monday 22nd, if you need directions i can PM you my post code...
And all are
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Comment
-
.
I have the cast upper arms as spares, on the car are the pressed version.
Subframe, didn't know there were any differences...
Paul...i hope you meant the car too...
Carlos.
On the look out for less bits for my s2 saloon project. Now supporting myself by shooting for my food. www.airgunforum.co.ukComment
-
Ooohhh excellent
Yeah there is an early type and late, the mounting bushes to chassis are different... One type has 2 front bushes and 2 different rear ones (all on rear subframe), the other type has 4 off the same bushes.Comment
-
AFAIK the subframes are the same, only the bushes are different. 2 have offset, 2 dont.
Last edited by Skull; 19 June 2009, 12:29.Audi Quattro WRComment
-
With a big enough hammer, you'll be done by lunchtime
Seriously though --->
1. Disconnect prop & probably need to get the zorst out of the way too
2. Slacken forward diff mount where it connects onto chassis
3. Remove handbrake cables and Remove flexible brake lines
4. Unbolt upper wishbone inner mounts to the top of strut/damper
5. Unbolt dampers from where they connect to lower wishbones
6. Remove the four subframe bolts with it all secured on a jack to drop all as one
Easy to say innit !!!Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don'tComment
Comment