Yes - remember this now - I only did it a year ago... I modified the same Golf/Sport snub bracket that Andy refers to and used a snub rubber from 200TQ (common to B6/B7 A4 as well) - it has been fine, but I never tried the allroad snub rubber as it just felt too hard at the time and I was concerned about noise transmission.
Announcement
Collapse
No announcement yet.
B3 Suspension mounts (Coupe)
Collapse
This is a sticky topic.
X
X
-
Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
-
@Andy - if I sent you an allroad snub rubber, would you see if it fits your ally mount ?Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
-
When I get the solid model over I can have a look at the design. The picture there is my design, it was then tweaked by another ex. S2 owner for his car, to fit with the aux. rad and then made into the one that was sold. It's a nice looking piece of kit for sureCheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss
Comment
-
Snub Mount
Hi Andy,
Alloy coolant pipe received: it looks fantastic
I'll probably wait until you put another order in for the snub mount...any idea when? Maybe worth putting a note out to other forum members to gauge interest?
Thanks again,
John2001 996 C4 - Being renovated
1994 ABY Coupe - "Das Smaragd RS2+ Coupe" - Sold
Comment
-
So what is the long term consensus? I am getting ready to refresh anything squishy over the winter. I daily drive the car but want to firm things up for canyon drives, track days, etc. I am hoping to get some kw v1s before next summer.
My "plan":
FRONT
Strut top mounts - 2 in total - Promounts or 034 Track Density or adjustable pillow ball (KW club sport style)
Wishbone bushes - 4 in total - I have delrin from 034
FARB bushes - Not running a front bar ATM
Subframe bushes - 4 at the front - solid alloy from 034
REAR
Strut top mounts - same as front
Wishbone bushes - same as front
RARB bushes - OEM for now
Rear track rods - OEM for now
Subframe bushes - 4 at the rear - same as front
ENGINE
Front snub mount - OEM
Left mount - Poly Mustang Transmission mount
Right mount - as above
GEARBOX- 911 engine mounts
Propshaft bearing - OEM
REAR DIFF
Three mounts here - 911 engine mounts & Powerflex rear mountLast edited by Mcstiff; 29 September 2012, 18:25.
Comment
-
Some new parts available on the market
FRONT
Strut top mounts - 2 in total - Top Mounts with 12 mm offset for Audi B2/B3/B4
https://www.akmotorsport.net/shop/to...h-12mm-offset/
Wishbone bushes - 4 in total - 45 mm for cast wishbnes
https://www.akmotorsport.net/shop/bu...e-bushes-45mm/
Subframe bushes - 4 at the offset front
https://www.akmotorsport.net/shop/bu...b3b4-offset-2/
Front track rods
https://www.akmotorsport.net/shop/su...rods-for-audi/
REAR
Strut top mounts - Audi B2/B3/B4 Top Mount
https://www.akmotorsport.net/shop/to...-b4-top-mount/
Wishbone bushes - 37mm
https://www.akmotorsport.net/shop/bu...ethane-bushes/
Subframe bushes - 4 non-offset at the rear
https://www.akmotorsport.net/shop/bu...shings-b2b3b4/
Rear track rods
https://www.akmotorsport.net/shop/su...rods-with-arb/
Audi Sport Quattro wishbones replicas for B3/B4 chassis
https://www.akmotorsport.net/shop/wi...hbone-set-003/
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
yes.
And there is also version for Audi B2 Coupe Quattro / Ur-Quattro monolith columns also
https://www.akmotorsport.net/shop/wi...ishbone-set-2/
and version for Audi Sedan, Avant, RS2
https://www.akmotorsport.net/shop/wi...ishbone-front/AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
-
I try to have them in stock all the time. But they sell out quite fastLast edited by Albert; 5 June 2015, 12:43.AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.net
Comment
Comment