Yes - remember this now - I only did it a year ago... I modified the same Golf/Sport snub bracket that Andy refers to and used a snub rubber from 200TQ (common to B6/B7 A4 as well) - it has been fine, but I never tried the allroad snub rubber as it just felt too hard at the time and I was concerned about noise transmission.
-
Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
-
i like that andy and i would have asked if you had an stm file or something but i got the wagner x member. may take a look at it see what can be doneComment
-
Cheers, nice to apply my engineering design skills to the old girl! I'll get some quotes but not sure on price as it was just my time before so overheads were much lower...Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
think its good for the standard setup.
we got ourselves a nice new little cnc machine here for making kettle/toaster george foreman grill mock-ups from alli so it may come in useful.Comment
-
@Andy - if I sent you an allroad snub rubber, would you see if it fits your ally mount ?Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don'tComment
-
I can always modify the design if it doesn't
Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
When I get the solid model over I can have a look at the design. The picture there is my design, it was then tweaked by another ex. S2 owner for his car, to fit with the aux. rad and then made into the one that was sold. It's a nice looking piece of kit for sure
Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
Snub Mount
Hi Andy,
Alloy coolant pipe received: it looks fantastic
I'll probably wait until you put another order in for the snub mount...any idea when? Maybe worth putting a note out to other forum members to gauge interest?
Thanks again,
John2001 996 C4 - Being renovated
1994 ABY Coupe - "Das Smaragd RS2+ Coupe" - Sold
Comment
-
So what is the long term consensus? I am getting ready to refresh anything squishy over the winter. I daily drive the car but want to firm things up for canyon drives, track days, etc. I am hoping to get some kw v1s before next summer.
My "plan":
FRONT
Strut top mounts - 2 in total - Promounts or 034 Track Density or adjustable pillow ball (KW club sport style)
Wishbone bushes - 4 in total - I have delrin from 034
FARB bushes - Not running a front bar ATM
Subframe bushes - 4 at the front - solid alloy from 034
REAR
Strut top mounts - same as front
Wishbone bushes - same as front
RARB bushes - OEM for now
Rear track rods - OEM for now
Subframe bushes - 4 at the rear - same as front
ENGINE
Front snub mount - OEM
Left mount - Poly Mustang Transmission mount
Right mount - as above
GEARBOX- 911 engine mounts
Propshaft bearing - OEM
REAR DIFF
Three mounts here - 911 engine mounts & Powerflex rear mountLast edited by Mcstiff; 29 September 2012, 17:25.Comment
-
Some new parts available on the market
FRONT
Strut top mounts - 2 in total - Top Mounts with 12 mm offset for Audi B2/B3/B4
Wishbone bushes - 4 in total - 45 mm for cast wishbnes
Subframe bushes - 4 at the offset front
Front track rods
REAR
Strut top mounts - Audi B2/B3/B4 Top Mount
Wishbone bushes - 37mm
Subframe bushes - 4 non-offset at the rear
Rear track rods
Audi Sport Quattro wishbones replicas for B3/B4 chassis
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
Looks great! Can these be used on a ur quattro using s2 running gear?Comment
-
yes.
And there is also version for Audi B2 Coupe Quattro / Ur-Quattro monolith columns also
and version for Audi Sedan, Avant, RS2
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
Ok. It's it's on my shopping list now. Do you intend on making many of these as I won't need them for some months.Comment
-
I try to have them in stock all the time. But they sell out quite fast
Last edited by Albert; 5 June 2015, 11:43.AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
Albert that's a good problem to have!!Comment
Comment