Koni adjustable shock absorber settings thread / shocks

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Error404
    Super Moderator
    • Mar 2007
    • 19789
    • Country: United Kingdom

    #1

    Koni adjustable shock absorber settings thread / shocks

    Will soon be fitting Konis & Coupe H&Rs - what are people running in terms of rebound settings on theirs?

    Is their a tried & tested set-up that works nicely on a road / occasional track toy?

    After some degree of comfort which is why i chose Konis over Billies, but ultimately I want the most precise handling I can get.

    I'm running a pretty stiff rear ARB and poly bushes throughout, these new springs & struts are really the final piece of the suspension rebuild before I start messing about with castor mounts etc.

    Anyone got any suggestions / experience? What are you running?
    Panthero Coupé quattro 20vt
    Indigo ABY coupé
    Imola B6 S4 Avant
  • GazzaG60
    S2Forum Freak
    • Mar 2007
    • 4133
    • Country: United Kingdom

    #2
    solid alloy bushes and poly with promounts will do the precise bit. the koni i find work very well either way. think im set full soft.

    its very sharp and very road compliant. aloso misses speed bumps easily. im on koni springs though not hr.

    Comment

    • Rusty
      Super Moderator
      • Jun 2004
      • 18953
      • Country: United Kingdom

      #3
      1 turn front, 0.5 rear from fully hard
      Cheers'en, AndyC
      1994 ABY Coupe - Projekt Alpinweiss

      Comment

      • Error404
        Super Moderator
        • Mar 2007
        • 19789
        • Country: United Kingdom

        #4
        Cheers boys

        is that 1.0 and 0.5 from fully hard on both front & rear Andy?

        how precise do you have to be with the settings? Do you need to use an angle setting gauge?
        Panthero Coupé quattro 20vt
        Indigo ABY coupé
        Imola B6 S4 Avant

        Comment

        • Rusty
          Super Moderator
          • Jun 2004
          • 18953
          • Country: United Kingdom

          #5
          Yes, both from fully hard, wind it in clockwise to the stop then back, fully hard is hard! For a more comfortable ride try adding 0.5-1.0 turns to those figures.
          Cheers'en, AndyC
          1994 ABY Coupe - Projekt Alpinweiss

          Comment

          • quattro84
            S2Forum Maniac
            • Mar 2006
            • 947
            • Country: Netherlands

            #6
            Originally posted by Error404
            Cheers boys
            how precise do you have to be with the settings? Do you need to use an angle setting gauge?
            Not really necessary, from benchmark experiences i know that these dampers can have a relatively high diversity in damping characteristics. (not that you'll notice)
            Aim for .25 turn accuracy IMO.

            Comment

            • Sonic
              Administrator
              • Jul 2006
              • 5514
              • Home: United Kingdom Current: England

              #7
              I'm interested in getting a set of koni's to replace my billies and go with my H&R springs, as the billies are just to stiff around these country roads in the lakes.

              I've heard the koni's are prone to "going" every 4-5 year though, whereas the billies are pretty much indestructible. How does this compare to peoples experiences?
              S2Forum.com Administrator

              Comment

              • GazzaG60
                S2Forum Freak
                • Mar 2007
                • 4133
                • Country: United Kingdom

                #8
                well sonic id expect your roads to not be disssimilar to mine. the koni works great.

                3 years and counting.

                billies are renowned for being solid tubes rather than shocks. yes very compliant on southern smooth surfaces or tracks. too bouncy on the road.

                Comment

                • Rusty
                  Super Moderator
                  • Jun 2004
                  • 18953
                  • Country: United Kingdom

                  #9
                  Konis on fully hard are rather solid
                  Cheers'en, AndyC
                  1994 ABY Coupe - Projekt Alpinweiss

                  Comment

                  • raymor
                    S2Forum Maniac
                    • Sep 2003
                    • 597
                    • Country: Scotland

                    #10
                    I got 2 years on Bilsteins on the front of my Avant before the seals started to weep. Replaced with Koni to preserve my fillings.Too many big hits on poor road surfaces.
                    I've got the same front Billie set refurbed on the CQ now. I had them revalved to a softer setting, so need to see how that feels...
                    1997 A6 (C4)Q TDi http://forums.tdiclub.com/showthread.php?t=291269 - Sold
                    1987 CQ85RS
                    1994 S2 Avant- Gone
                    1991 V8 -Gone, but lives on in the TDi and CQ

                    Fintray Hillclimb - 33.20s
                    Doune Hillclimb - 55.02s
                    Forrestburn Hillclimb - 52.61

                    Comment

                    • Sonic
                      Administrator
                      • Jul 2006
                      • 5514
                      • Home: United Kingdom Current: England

                      #11
                      Originally posted by raymor
                      I got 2 years on Bilsteins on the front of my Avant before the seals started to weep. Replaced with Koni to preserve my fillings.Too many big hits on poor road surfaces.
                      I've got the same front Billie set refurbed on the CQ now. I had them revalved to a softer setting, so need to see how that feels...
                      I'd be interested to know what you make the the billies now, as that is another option, get them refurbed with software settings rather than get koni's.

                      Is Aelred still the best place to get Koni's?
                      S2Forum.com Administrator

                      Comment

                      • GazzaG60
                        S2Forum Freak
                        • Mar 2007
                        • 4133
                        • Country: United Kingdom

                        #12
                        i use venom motorsport in blackburn. always been the best to my knowledge.

                        Comment

                        • Error404
                          Super Moderator
                          • Mar 2007
                          • 19789
                          • Country: United Kingdom

                          #13
                          Koni have rocketed in price recently, now similar price to Billies
                          Panthero Coupé quattro 20vt
                          Indigo ABY coupé
                          Imola B6 S4 Avant

                          Comment

                          • Sonic
                            Administrator
                            • Jul 2006
                            • 5514
                            • Home: United Kingdom Current: England

                            #14
                            Originally posted by Error404
                            Koni have rocketed in price recently, now similar price to Billies
                            ******!
                            S2Forum.com Administrator

                            Comment

                            • Sonic
                              Administrator
                              • Jul 2006
                              • 5514
                              • Home: United Kingdom Current: England

                              #15
                              Just had my koni's installed today.

                              The front's required a bit of bodging because there was ~3mm gap between the top of the damper and the screw-on strut cap that keeps the damper in place, even when using the provided spacer.

                              I adjusted both fully to the right which seemed to give the stiffest rebound, then dialled the front's back 1.5 turns (60%) and the rears back 1 turn (40%) to give the rear a slower rebound than the front.

                              Had a quick drive home (~20 miles) and immediate observations are that the clattering and crashing from the bilsteins has gone (i suspected the rear left was damaged), the roads feel flat again which is fantastic, although there was the odd jar at the front, the car dives like mad compared to the bilsteins under breaking (8-pot brembo's up front ) and it takes a fraction of a second longer to load-up as it corners which is a little unnerving, i guess because it is soggy compared to the bilsteins.

                              The car also feels like it wants to over-steer compared to before, i guess i got my estimations on the rebound settings out. I could loosen up the rear anti-roll bar also as this is on max stiffness. Still, it might actually feel more pointy at speed. Will have to see!

                              Should be fun a the 'ring next weekend, then
                              S2Forum.com Administrator

                              Comment

                              Working...