If we are lucky I get all parts ready this week, so I was promised.
Announcement
Collapse
No announcement yet.
Interesting in C4(UrS4/6 etc.) front subframe alu bushings?
Collapse
X
-
Nice, if anyone bails out you can PM me, and also if anyone is quick enough with the install I would like to have some feedback of noise and vibration
Any chance of a link to the finnish forum Thuppu is the question have been mention there so i can read for myself1995 Audi S6 - AAN (~350hp)
2008 BMW 530xd (235hp)
2008 Hyundai i30 - 1.6 CRDI (89hp)
2011 KTM 990 SMR - custom tuned (120whp)
Comment
-
Here is the thread on our finnish forum: http://www.audiclub.fi/audifinns/sho...d.php?t=110029
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
Scooped thrue Mulks thread of chassi upgrade for the C4, that was totally amasing... I wounder how much he would like to have to do the same setup as he did got any contact info?1995 Audi S6 - AAN (~350hp)
2008 BMW 530xd (235hp)
2008 Hyundai i30 - 1.6 CRDI (89hp)
2011 KTM 990 SMR - custom tuned (120whp)
Comment
-
All who ordered the set have paid me, but I do 4 extra sets and one set is still available.
I havn't any email address to Mulk but I can send him PM on our forum.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
Originally posted by Thuppu View PostAll who ordered the set have paid me, but I do 4 extra sets and one set is still available.
I havn't any email address to Mulk but I can send him PM on our forum.
Just a quicki about the kit you offer, the bolt´s is for the aluminum half in the front right? And for the rear you just re-use the triple bolt and the long bolt thru the track control arm correct?1995 Audi S6 - AAN (~350hp)
2008 BMW 530xd (235hp)
2008 Hyundai i30 - 1.6 CRDI (89hp)
2011 KTM 990 SMR - custom tuned (120whp)
Comment
-
Ok, I'll keep it for you. If you want, you can pay me now already, but it's no hurry with it.
The bolt's is for the rear fittings. The orginal rear bushing is so deep and the bolt is too long to re-use with these new bushings. Also the thread is now normal M12 size. Orginally it's some fine thread.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
Thuppu just email an paypal adress or your bank account detail with swift and iban number i can sort that out... only question is what bolt do i use on the front then? stock?1995 Audi S6 - AAN (~350hp)
2008 BMW 530xd (235hp)
2008 Hyundai i30 - 1.6 CRDI (89hp)
2011 KTM 990 SMR - custom tuned (120whp)
Comment
-
PM replied.
I didn't heard anything from the machine shop, but I will call them tomorrow. Really hope to get the alubushings in the beginning of the week.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
Did the call today... and the bushings are not ready yet, and propably will not be at this week.
I really hope no one isn't in hurry with these? My UrS would need them asap, can't move the car because the subframe is dropped down.
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
-
Got the steelflange bushings from the zinc coating. Still waiting for the alu bushings...
Audi UrS4 Avant 2.5 20vt - twincharged - Project
Audi 80q B4 Sedan 2.2 20vt - Daily user
BMW 320d Touring e91 M-Sport - Daily user
BMW 740iA e38 - Project
Comment
Comment