Anybody using kw variant 3

[mac2226]

I'm ordering some kw variant 3 coilovers for my s2 coupe Quattro anyone using the front antirollbar on back as well? Would like to know peoples feed back....

[Kliminati456]

I have that setup, handles great

[mac2226]

That's good do you have a front Antirollbar on back as well?

[Rusty]

Sonic has these.

[mac2226]

Thanks rusty do you know if sonic has the front Antirollbar at back as well?

[Rusty]

Not sure, I think he has a Whiteline.

Best setup is to get the higher rated kit, swap the front and rear springs (harder springs on the rear) and run a white line at the rear with stock front. Gives adjustability and a bit of compliance at the rear when compared with the FARB option.

[mac2226]

I got rid of whiteline rear arb because I thought it was not much better than standard now I'm getting kw 3 I wouldn't mine trying front arb on rear and if possible rs2 front arb if I can get hold of one?

[Error404]

RS2 farb on the rear will be too lairy IMHO and it will smash about over lumps & bumps.
Better to increase the rear axle stiffness with springs, which you can do easily with KWs if you order the AC specific set and swap the 70n springs onto the rear. This is what I have done and coupled with RS2 front bar and whiteline rear bar on stiffest setting it is excellent - very neutral.

[mac2226]

Yes will be ordering the heavy option error but I mean use a rs2 on front and a s2 coupe front on rear sorry to confuse people

[Rocco]

why not Ohlins?

KW´s are rubbish!

[Error404]

On your own words Thomas, "stop talking now!"




For sure Ohlins are some of the best but hardly good for most peoples wallets you dingo

[mac2226]

I would love some ohlins rocco but my pockets are not that deep and when would I get full use out of them

[Rocco]

I only was kidding

The jap crap owners loves the Ohlins...

+2k£ for them...

[PRY4SNO]

I contacted Stasis directly asking if they'd make me some Ohlins style coilovers, which they flat out refused.

So I bought v3 instead and am looking forward to installing them

[mac2226]

Kw3

Hi prys4no when will be getting them? As I've bought some but need to wait 3/5weeks but I'm sure they'll be worth the wait