STaSIS diff

[Billman]

where can i order those sheems or what INA or SKF partnumbers do i need? I am ready to do it now!

Do i need to change only these two like in here:

http://audizine.com/forum/showthread...-for-20-80-TBR

[quattro84]

I am still trying to find out what material to use for the shims.

[xgordyx]

not from me i'm afraid, not had time to do anything

Know the feeling bud

[Error404]

not from me i'm afraid, not had time to do anything

[xgordyx]

Is there any update on this?

[Error404]

Yup - that is the problem with the machining. We're going to try and make some special "disposable" tool to hold the washer as it is milled at high speed with plenty fluid
I'll report back how we get on - hopefully I'll get time in the next couple of weeks

[Mr.Crossfire]

Yes, getting the shims is not a problem here either, but the machining is. I know a guy who has access to a grinding machine, with a magnetic table. He says that it can be done, but will be Very slow because the shims are hardened, and should be grinded very carefully to not heat them up destroying the heat treatment.

[Rocco]

can someone give me an easily explanation about the advantages of this cheap cheap center diff upgrade??? i have a complete ARV gearbox + torsen center diff for spare.....and i have it to easy for send it worldwide


different torque dristribution with this upgrade may be??


-Tomas-

[Error404]

well i just spoke to my GF's bro about it - he recon's we can do it on his milling machine so I will try and remember to buy some washers in the next couple of weeks and we'll see what we can do - not easy to machine as its holding the things down that is the problem

[Rusty]

Keep up the good work, this is an interesting proposition

[Error404]

I've not done anything with it at the moment, had too much other stuff to do - but I now have an 01A and an 01E box to look at the centre diffs and use to work on.... getting the washers is no problem, but i ned to find a local machine shop to try out as I have moved house away from the place i was going to use...... I can sort out a GB on the washers no problem, then people have to shim their own diff and get the washers machined themselves

Maybe Billman has some progress?

[Mr.Crossfire]

Any news on this?

any news to mod the diff?

[S2central.net]

Great stuff Billman - I have been quietly watching this one - if its a success then it would be a mighty way to fundamentally change the bias of an S2/RS2... PLEASE keep us updated - whether its good or bad - people like you trying stuff out get answers for for everyone else...

[Billman]

I have bought a spare center Torsen in order to try this mod out! I am really excited about it....i hope it would be worth the hassle!