Wagner Inlet Install Questions

[newsh]

Look in my coupe project thread, there's a part number for the belt.

[EMU_S2]

First of all. thanks for the trade Newsh! lovely piece of pipe.

secondly. im running a 3B engine. anybody got a link for the V-belt for the PASP that would be needed? i saw one on a earlier page. but thats 13mm wide. where as the 3B as far as i know is 10mm??

[newsh]

Ok bud, I'll PM him

[andy10v]

I will take both if S2MTM fan does not want them first.

[newsh]

Here ya go boys. 20 quid for the hose, it will need extending with a straight bit to reach the IC as it was shortened to fit the MAF.

30quid for the blow though MAF tube complete with working MAF!

Both plus postage (about 7 quid?)

[newsh]

I'll post a pic of the hose too.

[newsh]

I would be interested in the hose if S2MTMFAN does not want it? (wagner intake on its way)

Has anybody thought of getting a small batch of RHD S2 wagner throttle cables made up?

Yes, I was thinking of going to Venhill in Dorking but it means taking the cable off the car and the dash is back in now..

[newsh]

is it one like this you refer to?

http://www.kf-z.de/ebay/wastegate_audi/lmm.jpg

Similar, I'll put a pic up later.

[andy10v]

I would be interested in the hose if S2MTMFAN does not want it? (wagner intake on its way)

Has anybody thought of getting a small batch of RHD S2 wagner throttle cables made up?

[EMU_S2]

is it one like this you refer to?

http://www.kf-z.de/ebay/wastegate_audi/lmm.jpg

[EMU_S2]

id be interrested in the MAF pipe. the hosing i allready got. and indeed. in Christopher on FB. PM me in there if ya like. im faster responding on the phone.

[newsh]

Were we talking on FB about this? If so I think the IM you were looking at came without the hoses. I was having a sort out in the garage and came across some parts.

I have a blow through MAF alloy tube setup and a silicon hose to fit the Wagner IM with the branch for the ISV. I will sell them if you're interested. They were running on S2 Bo's car.

John

[EMU_S2]

just found out yesterday wen i wend out to take a look at the parts im gonna buy that it is a real wagner intake. im having a friend of mine alloy weld a flange on for the idle stab engine. now my new question. how about going blow through maf? i saw earlier in the thread somebody did so. what piping should i úse for the maf that could withstand the boost? will i be able to run BOV'less with a blow through? and are there any disadvantages to blow through on a 3b compared to a Draw through stock setup?

[GazzaG60]

i used a 19" rack bracket dog ear. a big one for 3U and a piece of brake hose. I sheathed it with some old brake hose.

worked perfectly for 2+ years. this time im gonna mod the 16vq one. it is longer to start with than S2 by the looks of it.

[Henkjan]

for LHD there is another Audi throttle cable you can use, part# should be on the Wagner website

and you'll need the hose from the IC to the IM as well, don't see that in the advert.