S2 Avant into saloon

[lcsmith]

I know this is an old thread but there seems to be lots of knowledge here so......

I'm planning an S2 hub conversion on my Audi 80 (B3) quattro 2.0 16v and found a donor car locally (for free) with 82mm driveshafts which I understand fit directly onto S2 hubs.

My question is;

Does anyone know if the driveshafts from an Audi 80 (B4) quattro 2.8 V6 fit directly onto an Audi 80 (B3) quattro 2.0 16v?

Thanks,
Leigh

[Error404]

You need to check the inner CV bolt PCD.
IIRC the 10v and 16v are only 90mm whereas the V6 & 20v quattro is 100mm and the S2 is 108mm.

[lcsmith]

I've sourced Audi 90 20v 7A driveshafts, diff, gearbox, propshaft & s2 coupe hubs.....I think that should all I need

[Error404]

yes then that should work