Announcement

Collapse
No announcement yet.

Group Buy: Front Tie Rod adjusters

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Group Buy: Front Tie Rod adjusters

    Following on from the work that Bambridge did before I am looking into getting more tie rod adjusters made with 17mm AF adjuster in EN16T. I am getting pricing for them at the moment and wanted to gauge how much interest there is for these to get an idea of batch size to get made.

    At the moment the prices I have had back so far would put a pair with delivery between £24 and £30 including postage. The spec would provide an 8-10mm width on the 17mm AF section so they would have a lot more material to get a decent purchase for adjusting the tie rods.

    Previous info on them https://www.s2forum.com/forum/techni...djusters/page2 and https://www.s2forum.com/forum/techni...-rod-adjusters there is details of QH5005S ones being compatible, but looking around they are a similar price to the improved design with the larger adjuster I am putting forward here.
    19
    I would want to buy a pair of tie rod adjusters with 17mm adjuster
    68.42%
    13
    I would want to buy two pairs of tie rod adjusters with 17mm adjuster
    31.58%
    6
    Last edited by Greg_S; 5th April 2018, 21:59.
    Greg

    S2Forum.com Administrator & Webmaster

    '93 Coupe with a few tweeks

  • #2
    And how about the rear ones? Coupe

    Comment


    • #3
      Hi Greg,

      I'd be happy to buy a pair for one car to have a set on the shelf.

      Thanks for looking into this.



      Comment


      • #4
        Hi Greg,
        Would they fit 1994 URS4 ? Are they rose-joint? I will be interested. thanks

        Comment


        • #5
          Originally posted by Henkjan View Post
          And how about the rear ones? Coupe
          I will need to check if they fit the rear too, I expect that will do but will need to confirm.
          Greg

          S2Forum.com Administrator & Webmaster

          '93 Coupe with a few tweeks

          Comment


          • #6
            Originally posted by kj6304 View Post
            Hi Greg,
            Would they fit 1994 URS4 ? Are they rose-joint? I will be interested. thanks
            This isn’t for the whole arm, just the threaded adjuster for setting up the alignment since you can buy the tie rod ends but not the adjuster easily which is usually the part that gets rounded off when adjusting alignment.
            Greg

            S2Forum.com Administrator & Webmaster

            '93 Coupe with a few tweeks

            Comment


            • #7
              I'll have a pair if they fit the rear Greg (already have them for the front)
              Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
              S2 Coupe... bit easier off the line...
              '03 ZX12-R daily hack.... lots of nice bolt ons...

              Comment


              • #8
                Originally posted by Greg_S View Post

                I will need to check if they fit the rear too, I expect that will do but will need to confirm.
                that would be great. in that case I'll have to vote again in the poll

                Comment


                • #9
                  Will they fit the Avant?

                  Comment


                  • #10
                    Originally posted by Tractor Dave View Post
                    Will they fit the Avant?
                    Yes certainly front arms, I need to confirm on the rears
                    Greg

                    S2Forum.com Administrator & Webmaster

                    '93 Coupe with a few tweeks

                    Comment


                    • #11
                      Ok, I'm replacing more or less everything so put me down for the fronts. Rear as well if it will fit.

                      Comment


                      • #12
                        Put me down for a couple of pairs Greg

                        S2 Coupe 3B Project


                        Ur quattro restoration

                        S2 Avant

                        Boost is the new rock and roll!
                        sigpic

                        Comment


                        • #13
                          Before I got through parts catalogues can anyone tell me if the tie rod adjusters are the same size front and rear on the coupe and are the same on the avant too?
                          Greg

                          S2Forum.com Administrator & Webmaster

                          '93 Coupe with a few tweeks

                          Comment


                          • #14
                            Hi I’d like a front set please thanks

                            Comment


                            • #15
                              I'd take a pair for my S4
                              '93 Audi 100 Avant - R.I.P
                              '92 Audi UrS4 Avant - SOLD
                              '93 Audi UrS4 Avant LPG

                              Comment

                              Working...
                              X