Bosch Motorsport Fuel Pump's No. 2

[Greg_S]

You just need to cut some slots in the top of the basket and push the pump in, so the new pump sits as low as the original pump.

I did a set of instructions on how to fit the pump which I will send out with each kit.

[Greg_S]

I have PM's from raymor and AudiS2au so far. Shipping to oz isnt a problem

Greg

[s2avant]

Ben: Would you be so kind and put what cars had such parts in origin ? I gonna go to scrap yard and buy second hand parts .

Thanks.

You should be able to get them from most Audi Coupe,80,100,200 with a 60mm fuel pump.

ACE, 6A and NG engines use it as standard and most other cars had to convert to a 60mm pump if they needed a replacement.

Ben

[s2avant]

Well I've spent an hour this afternoon dismantling the car to change the fuel pump. Very easy to get everything apart and get into the tank.

Then I hit a bit of a problem.

Inside the tank is a plastic basket fixed to the bottom of the tank. The fuel pump retainer fits in this to hold it in place. All you have to do is use the special tool to release the pump retainer from it's basket and lift it out.

On my Avant the basket isn't attached to the tank anymore This makes it impossible to turn the fuel pump retainer as the whole basket moves. It also explains my random fuel gauge readings and occasional fuel starvation as it is literally floating in the tank.

So at present I can't do a lovely how to on changing the fuel pump.

Fear not though as I will be accidentally ordering a brand new fuel tank and all associated parts on Monday (yes boss I need a new fuel tank as my car won't run without it, honest and I won't be able to come to work and make you lots of money )

I will be able to take plenty of pictures of how to do it with the tank out of the car. Just got to persuade my mechanic to fit the new tank.

Ben

[Greg_S]

thats good news mate, have you got any pictures of the basket because I guess it is the same as the coupes?

[stevieyid]

hi what is the part number for this fuel pump? i might try and see if it will go on my ur?

[newsh]

hi what is the part number for this fuel pump? i might try and see if it will go on my ur?

This is different to the ur pump, this one is immersed in the fuel tank. Besides the ur fuel pump is completely adequate, if in good condition, the wiring to it is not though so well worth doing the relay mod, check the other forum.

[Greg_S]

Gav your on the list too. After I get this week out of the way I will start to firm up where we are on this group buy.

Stevieyid if you can get me the bosch p/n i will see what i can get for the UR

[Greg_S]

So far for this group buy I have Audi S2 Au, Raymor and DJ Roy for the pumps. I dont think I will be able to sort out the other bits this time so it will be the pump alone but part numbers I will post up on here.

Reservoir(pump mount): W895 201 779H
Strainer: 895 201 531A
Sealing Washer N 013 812 8 x 2
Adapter (Banjo) N 903 307 01
M12 x 1.5 Nut N0110691
BOSCH FUEL PUMP P/N 0580 254 044

Price on the pump to follow shortly

[raymor]

that's fine.

cheers Greg

Raymond

[martinjs]

Greg, can you put me down for one of these pumps too please.
thanks

martin

[Greg_S]

sure no problem

[RS2 CQ]

Greg,

Will this kit fit a U.S. 1990 Coupe? If so and you can ship to the US, I'd like to get a whole kit.

Chris

[Greg_S]

Chris,

Not sure about the 1990 coupe, assuming it uses the same fuel tank it will fit. I am only arranging the purchase of the pumps this time since I am very busy but the part list is in the thread. If you can confirm the setup is the same, which i guess it probably will be. I can get one ordered for you too.

[Greg_S]

I have pricing on the pumps now, they will be priced at £145 inc VAT + P&P.

I will start up a fresh thread with the names I have already.