Announcement

Collapse
No announcement yet.

Group Buy Interest - Billet Crankcase Breather - 054 103 129

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Group Buy Interest - Billet Crankcase Breather - 054 103 129

    Hi Everyone,
    Photos of the breathers


    With the fitting installed:


    and one more picture for good measure:


    Talking with Brian Tonks (Tonks4x4) and we are guaging interest to see how many would be interested in a billet replacement to the OEM 054 103 129.

    This is what the OEM unit looks like (Courtesy of forum member Thuppu)


    This is the current rendering which can change based on forum feedback:



    Key features will include:
    - Tapered back plate w/o-ring to allow for proper sealing once it is installed in the block
    - T6061 Aluminum construction for that Bling factor
    -Anodized in Clear / Black / Red or Gold
    - AN-12 female tap to those who want to run a catch can can use an AN-16 male union and run a line to your catch can or if you want to use your OEM line , an AN-16 to barb fitting is available.
    - 8AN plug included for a catch can return.
    - Laser cut baffling plate on the back side to aid in crankcase baffling.

    Pricing is £99.00 GBP + P&P .

    Last edited by Wizard-of-OD; 17 September 2016, 03:55.
    Issam N. Abed
    iABED Industries
    iABED Email | Facebook
    The build thread

  • #2
    any news on this?

    LIST:
    Wizard-Of-OD
    Wizard-Of-OD
    Tonks4x4
    Tonks4x4
    Tonks4x4
    Tonks4x4
    Tonks4x4
    europeanme

    Comment


    • #3
      Would there be any kind of baffle to help prevent oil slosh out?
      Current-2004 Impreza PPP wagon

      Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
      Sold ABY-stock

      Comment


      • #4
        Originally posted by Wizard-of-OD View Post

        - Laser cut baffling plate on the back side to aid in crankcase baffling.


        ^^^^

        S2 Coupe 3B Project


        Ur quattro restoration

        S2 Avant

        Boost is the new rock and roll!
        sigpic

        Comment


        • #5
          Originally posted by newsh View Post
          ^^^^
          Current-2004 Impreza PPP wagon

          Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
          Sold ABY-stock

          Comment


          • #6
            I'd be in for one.

            Comment


            • #7
              Put me down for one too
              sigpic
              1991 Audi S2 3B - 2.5 Stroker engine
              1997 A6 2.5TDi quattro avant - C4
              1976 RD250E / 350LC cafe racer

              Comment


              • #8
                see below
                Last edited by Wizard-of-OD; 7 February 2015, 18:10.
                Issam N. Abed
                iABED Industries
                iABED Email | Facebook
                The build thread

                Comment


                • #9
                  I'd be interested in one too

                  Comment


                  • #10
                    Hello Gents,
                    Finishing up some other projects and took another go at the Breather cap.


                    As shown I am going to be making these 2 piece. The 1st piece takes a dead blow to the block and fixes it there. The 2nd part will bolt to the adapter and that way it can be serviced without removing the entire unit damaging it. As of right now , I have measured across 4 blocks and 3 of them came back @ 67.5mm and 1 @ 67.6mm.
                    The oem breather cap has an opposite taper in it , i.e. it gets smaller in diameter from 67.5mm to 67mm the closer it gets to the mating face.

                    What is everyone's thoughts on this?
                    Issam N. Abed
                    iABED Industries
                    iABED Email | Facebook
                    The build thread

                    Comment


                    • #11
                      I'm interested in one please

                      Comment


                      • #12
                        I'm interested too

                        Comment


                        • #13
                          LIST:
                          1. Wizard-Of-OD
                          2. Wizard-Of-OD
                          3. Tonks4x4
                          4. Tonks4x4
                          5. Tonks4x4
                          6. Tonks4x4
                          7. Tonks4x4
                          8. europeanm
                          9. ringbearer
                          10. AndyP
                          11. Henkjan
                          12. mac2226
                          13. ash2050


                          TOTAL = 13
                          Issam N. Abed
                          iABED Industries
                          iABED Email | Facebook
                          The build thread

                          Comment


                          • #14
                            I'll take one pal:

                            Wizard-Of-OD
                            Wizard-Of-OD
                            Tonks4x4
                            Tonks4x4
                            Tonks4x4
                            Tonks4x4
                            Tonks4x4
                            europeanm
                            ringbearer
                            AndyP
                            Henkjan
                            mac2226
                            ash2050
                            Error404
                            Panthero Coupé quattro 20vt
                            Indigo ABY coupé
                            Imola B6 S4 Avant

                            Comment


                            • #15
                              Originally posted by Error404 View Post
                              I'll take one pal:

                              Wizard-Of-OD
                              Wizard-Of-OD
                              Tonks4x4
                              Tonks4x4
                              Tonks4x4
                              Tonks4x4
                              Tonks4x4
                              europeanm
                              ringbearer
                              AndyP
                              Henkjan
                              mac2226
                              ash2050
                              Error404
                              Recenetly finished up the Crankcase breather unit for the TDI's


                              Also revised the assembly to be a little cheaper to machine. Will get this going shortly as well. Need to finalize a quote for laser cutting the baffles from SS.
                              Issam N. Abed
                              iABED Industries
                              iABED Email | Facebook
                              The build thread

                              Comment

                              Working...
                              X