AAN T55 - ECU Connector Pin-out

**newsh** · 1 June 2017, 15:25

Or ignore the 2 pin plugs and go straight to an odb multipin

**UrS4boy** · 1 June 2017, 15:45

Converting an Audi OBD2 plug to Function as an OBD1 port for some scanners

Originally posted by newsh

Or ignore the 2 pin plugs and go straight to an odb multipin

<slaps forehead>

Duh. I've even written/posted about that:

Converting an Audi OBD2 plug to Function as an OBD1 port for some scanners:

quattroworld.com Forums: Converting an Audi OBD2 plug to Function as an OBD1 port for some scanners

http://forums.quattroworld.com/s4s6/msgs/297228.phtml

The Audi Enthusiast website. Forums for all Audis including A4, S4, A5, S5, A6, S6, allroad, A8, S8, TT, R8, Q5, Q7, 4000, 100, 200, v6, v8, vintage, local forums

**4v6** · 3 June 2017, 13:01

Thanks very much for that info, I did have a look on etka and found those two numbers earlier in the week but couldnt categorically be sure they were what I wanted, but youve confiemed it for me.
Also grand idea on converting to obd2 plug, may do that instead, seems a better way to me.

Will likeley do that when i get my ecu back from Spink! :tup:

Thanks again for your help, much appreciated.

AAN T55 - ECU Connector Pin-out

Comment

Comment

Comment