Or ignore the 2 pin plugs and go straight to an odb multipin
Announcement
Collapse
No announcement yet.
AAN T55 - ECU Connector Pin-out
Collapse
X
-
-
Converting an Audi OBD2 plug to Function as an OBD1 port for some scanners
Originally posted by newsh View PostOr ignore the 2 pin plugs and go straight to an odb multipin
Duh. I've even written/posted about that:
Converting an Audi OBD2 plug to Function as an OBD1 port for some scanners:
http://forums.quattroworld.com/s4s6/msgs/297228.phtml
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
Comment
-
Thanks very much for that info, I did have a look on etka and found those two numbers earlier in the week but couldnt categorically be sure they were what I wanted, but youve confiemed it for me.
Also grand idea on converting to obd2 plug, may do that instead, seems a better way to me.
Will likeley do that when i get my ecu back from Spink! :tup:
Thanks again for your help, much appreciated.
Comment
Comment