Would it be possible to get one with a unmodified exhaust turbine?
K26 turbo - 450+ HP - after full rebuild
Collapse
X
-
yesAKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
the turbo is starting to pull at 3000, at 3500 full Nm ... price same
The gain is minimal 100 rpm +/- more to gain at cams setup, petrol, custom remap, IC + housing ect.AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
This one has new race blade (cold side):
inducer 56,50 mm
exducer 78 mm
extended tip 81 mmAKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
www.quattro.ca
B2: 82 Urq into Sport quattro, 82 4000 2-door, 83 80q 2 Door, 83 Ur-q CDN, 85 Ur-q Euro with 3B, 86 4kq, 59,000km
B3/B4: 91 CQ, 93 90q 2.5TDI, 94 80q avant 2.5tdi, 94 S2 AvantComment
-
Sorry I mean't the actual OD of the compressor cover inlet to attach the MAF or air filter onto. The compressor is wheel is larger than the KX500 26/27 I have as it's measurements are:
Inducer 54.80 mm
Exducer 76.00 mm
I have full boost by 3,500 rpm and runs 31 psi to reach 430-450 bhp. I've tried to get a billet wheel for it without much luck. Perhaps it could be tweaked with the wheel you use?91 Modded 3B
14 A6 Avant Black EditionComment
-
Perhaps it could be. Please contact me through PM.Sorry I mean't the actual OD of the compressor cover inlet to attach the MAF or air filter onto. The compressor is wheel is larger than the KX500 26/27 I have as it's measurements are:
Inducer 54.80 mm
Exducer 76.00 mm
I have full boost by 3,500 rpm and runs 31 psi to reach 430-450 bhp. I've tried to get a billet wheel for it without much luck. Perhaps it could be tweaked with the wheel you use?AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
All the turbos are gone. Will have more after 15th of January.AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
Comment
-
AKmotorsport.net - Manufacturing Motorsport parts that do the job. | Audi S2 on Facebook | Best way of reaching me is sending email to albert@akmotorsport.netComment
-
Comment
Comment