Crank and girdle installed, the girdle has silicon flange sealant between it and the block pan rail.
Announcement
Collapse
No announcement yet.
Bottom End Rebuild Pics
Collapse
This is a sticky topic.
X
X
-
10mm spacer was used between oil pump and pick up pipe (girdle is 10mm thick). I used a 7A pick up pipe with two paper gaskets (ABY/ADU pick up uses an O ring).Attached FilesLast edited by Mark Halligan; 5 July 2006, 20:11.Mark - Modded
Comment
-
Originally posted by Mark HalliganSpacer was 10mm spacer was used between oil pump and pick up pipe (girdle is 10mm thick). I used a 7A pick up pipe with two paper gaskets (ABY/ADU uses an O ring).sigpic
Comment
Comment