sport quattro replica

[quattro84]

Nice results, looks great mounted to the Rototest!

What was the exact problem with the relay?
Was the cardan bearing rubber too soft?

[G60Rallye]

The car is looking superb! How are the KW v3's? I have been thinking of getting some myself.

[zlobo]

Nice results, looks great mounted to the Rototest!

What was the exact problem with the relay?
Was the cardan bearing rubber too soft?

tnx

the bearing for the joint in the cardan broke and was compleatly gone,


the problem with the releay was fabrication error probably it worked when it feeled like when i accelerate on the strip it disconnected the circut and cuted power to the injectors and coils, also when i was taping the relay it some time disconnected power.

[zlobo]

The car is looking superb! How are the KW v3's? I have been thinking of getting some myself.

tnx,

the kw v3's is great the handeling just perfect.

[zlobo]

its time for an update i think...

some time people think that i stoped to do things on the sq but those people are wrong

i replaced the aeromotive filter, it did not like E85 used an bosch filter from porch instead.

i was out on a inpulsive tripp ant stoped to take some pics.








I dismounted öhmans old diff i will use it on the spq i think.
also mounted some DEI heat shild.









Yesterday i was in hultsfred on dragrace my best time of the day was 11.13@209km/h o en 60ft 1,89s

I hadd somme issue with the alternator belt that jumped of al the time.

Drove the elimination on the late em and managed to get to the final.
But 3 racesbefore that i destroyed the altenator belt, but i decided to continue to run on batt power.

i won and got to the finale, al the time i culd se the power droping. at the finale i got 10v in the bichbox when i staged in i got 9v so i quiqly decided to do a walk over.
When i got back to park the spq i got 8volt.

I was lucky to bring a old belt so i culd drive home.

anyway i finished on the 2nd place and had a great day.

http://www.youtube.com/watch?v=NelTb...layer_embedded

[zlobo]

ok then now we need to update

this weekend we loaded the spq


We traveld 800km on friday to Sundsvsll in northen sweden it was a ¨10h long trip.




On saterday morning we went to Sundsvall race way.


http://www.youtube.com/watch?v=l41zYwDIcRw
i am very satisfierd with the result and i thing it will be hard for me to drive it faster than this, next raxe will be in Agust 6.

i ended up with a new personal record on 1/4mile 10.77s and 210km/h 60ft 1,65.
i had some traction problems during the day some time its to slipery some time to good grip.

[G60Rallye]

Congratulations on getting a ten second run! Car looks to be going very very well!

[zlobo]

Congratulations on getting a ten second run! Car looks to be going very very well!

tnx. Yes it runs great, next step is to test it on the track to se how it behaves..

[G60Rallye]

As featured in this months PVW magazine! Its a very good read congratulations!

[campbellWS]

Nice feature in pvw!!!
Probably a stupid question,
Can someone tell me what exact car/block that cam cover is from. I see alot of tuners use these but it dont look familiar to me thanks.

[martinjs]

Its a 7a cover (20v b3 coupe or 90) with a blanked off oil filler hole.

[newsh]

I think that's a 7A cam cover.

[campbellWS]

Aaah i see, it looks like a 7a (but with a blanked filler cap) haha yeah i thought it was an early one or something.

Thanks

[zlobo]

cool Anders told me it would be in the PVW, but i did not know when..
i will go to the store and get it tomorrow

the walve cower is a 7a with a blanked cap.


today i replaced my broken gearbod that broke down at mantorp 2 weeks ago.
so now i have a 6speed gearbox in, tomorrow i wil test drive it and se if the gearbox is ok.

thw new gerbox washed and pimped up..



fited it, and left some stuff for the morning.

[URquattroGus]

Great poroject Zlobo! Where did you get your turbo heat shield/jacket from? Looks quite neat.