You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Nice work! You have the same front discs as I do, they're good but they eat pads, I got through a set in 6 months! Mine will be getting simillar treatment very soon :mischeif:
Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss
Nice work! You have the same front discs as I do, they're good but they eat pads, I got through a set in 6 months! Mine will be getting simillar treatment very soon
Well now your are mentioning it I just have decided the brake system will be removed from the car. The reasen for this this setup is nog braking hard enought. The braking system will be replaced with:
1. 335mm discs with aluminum hart
2. Hispec 6 pistons big brake
3. Head brake cilinder from an RS2
4. Carbon Lorraine brake pads
Ferodo DS2500 pads sorted mine out a treat, no probs with track days but I can see that prolonged use might cause excess heat.
I was also driving with teh ferrode DS2500 pads. The problem is not the heating, just that this setup is not braking hard enougt. And because the power of the car will be doubled, we have chosen to change the setup.
Nice project, but are you sure you want to use the Rieger styling? If you do circut racing it will crack with the slightes impact, allso the paint. Saw an S2 this weekend with the styling, and it was all cracked and the paint did not look good at all, and that car was not used on the track! If I where you I would stay away from styling on a circut car.
Nice project, but are you sure you want to use the Rieger styling? If you do circut racing it will crack with the slightes impact, allso the paint. Saw an S2 this weekend with the styling, and it was all cracked and the paint did not look good at all, and that car was not used on the track! If I where you I would stay away from styling on a circut car.
Well i have been on and off (was not planned for ) the track. But the bumper is still Ok. So we will see, but i am confident about it
Nice project... waiting to see some more pictures and results once it is finished. Evert Thomas, who is going to map the car once it's finished? A friend of mine has ordered nearly the same you have to 034motorsport and they are providing him the chips, but his car is an ABY and yours a 3B (like mine) and I think 034motosport does not have chips for 3B.
Originally posted by Jamo
There is a different master brake cylinder listed for the LHD RS2 only
About the brake cylinder, I also thought that it was the same for all S2/RS2, but I didn't know that for left hand drive RS2 there was a different reference. Do you know if this master cylinder is bigger than the rest?
Thanks in advance.
Javier.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
) the track. But the bumper is still Ok. So we will see, but i am confident about it
Comment