RS2 "stroker" projekt... 700hp

[lind4hl]

Can i guess? Biltema?

[smiler]

Can i guess? Biltema?

:corey:

[maniac]

Fuk me sideways! What a project! You are mad!

[Andreas]

Smiler: awesome project dude! you have too much carbon for one car - gimme (:


Maniac: wrong forum!! try hard.nu

[smiler]

Fuk me sideways! What a project! You are mad!

I'm going crazy!

Smiler: awesome project dude! you have too much carbon for one car - gimme (:

It's quite a lot but I can live with it...

[smiler]

Got an email last week that they had made an error in the processing of my head...



The valves should have been race in a standard size.




Not all errors are bad, however...


Setup now is larger valves for both intake and exhaust in Inconell
No extra charge for me...

[quattro84]

You lucky *******...

[AndersS2]

Me like very much!

Love all the carbon details inside!
Have you used some guy in germany for this, because I have and it looks quite like his work.

Its all in the details

[lind4hl]

Anders, that´s correct, company is now gone though, with Thomas c-pillar trims..

[smiler]

Damn!

330mm disc does not work ... caliper will be too close to the rim.
May probably use the original 322x32 with the right hat height.

Hope it will work with these calipers


Brake pads will be slightly larger than the disc, maybe i can grind a bit on the edge of the pad

[Tom_]

how much did you payed for the calipers,brake discs and all things which is need to fit the 996tt porsche brakes.Thanks

[PaulJ]

Damn!

330mm disc does not work ... caliper will be too close to the rim.
May probably use the original 322x32 with the right hat height.

Hope it will work with these calipers


Brake pads will be slightly larger than the disc, maybe i can grind a bit on the edge of the pad

Hi

Beware, The 322mm disks I've used are from the 993RS and are a 1 piece disk with hat height of 45mm, the option disk from the Rs2 is from the 993 Turbo and I believe the hat height is 40mm, this would move the caliper 5mm further out and may foul the wheel

I've got the different disks so would be able to check on the standard 17" wheels with the 6 pots at the weekend. I Also remember the the bolt holes on the calipers are not equally spaced above and below caliper center line if that makes sense, For some reason my calipers are red with the ceramic covers on the pistons, The 350mm disks have no chance of fitting 17" wheels, I've tried, Are you going with monoblocks on the back as well?

Cheers Paul

[smiler]

Hi

Beware, The 322mm disks I've used are from the 993RS and are a 1 piece disk with hat height of 45mm, the option disk from the Rs2 is from the 993 Turbo and I believe the hat height is 40mm, this would move the caliper 5mm further out and may foul the wheel

I've got the different disks so would be able to check on the standard 17" wheels with the 6 pots at the weekend. I Also remember the the bolt holes on the calipers are not equally spaced above and below caliper center line if that makes sense, For some reason my calipers are red with the ceramic covers on the pistons, The 350mm disks have no chance of fitting 17" wheels, I've tried, Are you going with monoblocks on the back as well?

Cheers Paul

I had the 322x32 993 Turbo discs before... 45mm from the hat down to the disc.
That should clear, but its tight

The 330x34 is 35mm from the hat down to the disc.

I need the 10mm to clear the rim outwards


The boltholes are crazy... doesnt matter when i have to make the brackets anyway?


I was going to use de oem calipers in the rear, but who knows
Any suggestions with the OEM 299x24 disc?

[smiler]

how much did you payed for the calipers,brake discs and all things which is need to fit the 996tt porsche brakes.Thanks

The work is not done... dont have an answer yet

[breitling]

Very nice project! Keep up posting all those nice pics